Instantly and accurately detect process changes due to variations in oven loading, convection levels, conveyor speed or zone set points errors. The SolderStar DeltaProbe is periodically passed through the reflow process to allow rapid verification of
Electronics Forum | Thu May 21 12:53:38 EDT 2020 | spoiltforchoice
A cheap piston compressor (like you might use in a garage) should be rated such that it has ~50% duty cycle, you don't want it running continuously. They are very affordable but do switch on and off between two essentially hardwired setpoints. The b
Electronics Forum | Mon May 25 20:51:13 EDT 2020 | kylehunter
> A cheap piston compressor (like you might use in > a garage) should be rated such that it has ~50% > duty cycle, you don't want it running > continuously. They are very affordable but do > switch on and off between two essentiall
Industry News | 2018-10-18 10:12:06.0
Under what conditions do you set different temperatures for the TOP and Bottom heating elements of a reflow oven?
Industry News | 2004-09-09 12:47:44.0
Michael Simpson and John Bowen Join Parvus as Director of Sales and Marketing and Director of Finance, Respectively
Parts & Supplies | Assembly Accessories
Detailed Product Description Features: 7 Channel Brand: KIC Part Name: X5 Reflow Profiler Model: X5 Condition: Original New Leadtime: 7days KIC X5 Thermal Profiler with SPC software and RF capability For Reflow Track More Data Points With 7,
KingFei SMT Tech | http://www.smtspare-parts.com/sale-11140440-kic-x5-thermal-profiler-with-spc-software-and-rf-capability-for-reflow.html
KIC’s powerful Navigator™ software is a system that automatically determines the single best oven recipe for every product. Once the initial profile is run, the Navigator evaluates billions of combinations of conveyor speeds and setpoint temperatures in less than a minute, so operators no longer need to set search parameters
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/FPC-with-Time-Pressure-Control-in-FLOware-Software-22240106.pdf
, and Run Setpoint pressure will be achieved when you press the RUN button. Vacuum To set the amount of vacuum, as a percentage, present when set point pressure is being held per Holding Setpoint, set a value in the Vacuum % field. Standby time To set the
