Electronics Forum | Mon Jan 29 15:49:08 EST 2007 | rmitchell
Hi, Our Fuji CP65 nozzles are jamming in the up position. Mostly on caps and resistors, the .7mm (0402) and 1.0mm (0805) and 1.3mm (1206) sizes. They seem to be catching internally where the little peg slides down the slot. If you twist them they
Electronics Forum | Thu Jun 19 09:33:09 EDT 2008 | stevenvl
Hi, I'm having issues with boards sticking/jamming along the line, as well as what seems to be excessive wear along the guide rails. The boards are an Alumina Ceramic material and the rails differ by machine, but include anodized aluminum, steel, de
Electronics Forum | Thu Mar 04 08:48:31 EST 2004 | Erv
We tried splicing and found numerous problems with jamming. To make a long story short, as a rule we just don't do it. There are exceptions such as; we are short a part and need to use several very short pieces of tape and reel parts.
Electronics Forum | Thu May 20 01:53:31 EDT 2004 | alwil
I repair our Fuji feeders myself. They are easy to work on. Most of the issues are usually related to components jammed and general cleaning. Minimum lubrication is required. Tape leafs are inexpensive to replace too. Happy repairing. Cheers.
Electronics Forum | Wed Apr 27 16:55:38 EDT 2005 | grantp
Hi, The 8mm versions do change fast, but the 12 and 16mm versions jam all the time, and MYDATA has no fix for it, as apparently no one else is having that problem. Regards, Grant
Electronics Forum | Thu Sep 15 16:02:20 EDT 2005 | jdengler
Over Current means the motor is drawling too much current. Check for a jam on that axis, bad wire, bad motor, bad servo amp (yes the amp can go bad and make it appear that the motor is drawling too much current). Jerry
Electronics Forum | Fri Sep 23 04:11:53 EDT 2005 | Rob
Hi Greg, A larger floor standing spool would seem a good way to go, but on the larger plastic tapes, trying to accurately join them to feed through without jamming or coming apart is a total pain. Cheers, Rob
Electronics Forum | Wed Oct 26 11:02:17 EDT 2005 | Rob
I wouldn't say we've escaped either - Fuji blade wear is heavily up at the moment.
Electronics Forum | Thu Oct 27 08:46:58 EDT 2005 | james
Yes I would have to agree Kemet is the worse. I believe our feeders are just not strong enough to handle the thickness of the tape. It seems to need alot of force to move and to roll the tape through.
Electronics Forum | Thu Oct 27 09:50:10 EDT 2005 | russ
Thanks Rob, Our tape does meet the Kemet spec but I am actually wondering if there is an EIA spec or something to compare to.
.png)
