Electronics Forum | Wed Dec 05 09:26:08 EST 2012 | proceng1
I've got four KISS 103s. If you keep up with the pump cleaning and especially keep your nozzles clean on the Lead Free, they are great. The only downside with them is that they are West Coast and we are East Coast, so if I have an issue first thing
Electronics Forum | Thu Jun 21 16:30:47 EDT 2012 | grauen06
We are currently using an ACE K.I.S.S. 104. We used SN100 solder with AIM NC265 flux (no clean, alcohol-based). Also, we use topside preheat at 100 degrees C and a 6mm nozzle (as big as we can go with this application). The PCB has a matte finish as
Electronics Forum | Thu Mar 11 11:08:22 EST 2010 | geocep
I am using AIM Electropure SN63/Pb37 Solder, & AIM NC266-3 Flux; just like what ACE recommends. I have both Ultra High Pure T-Tanks and a Cryogenic Dewar Tank for Nitrogen, and neither seems to have improved the problem. I place a piece of tempered
Electronics Forum | Fri Dec 27 12:53:38 EST 2019 | rgduval
yeah...I never had airflow volume problems with Hellers. When I had to build the system I was referring to, we had an old Speedline oven, and the way it was configured if you didn't provide enough airflow to the outer cavity, the blowers would overh
Electronics Forum | Sat Dec 28 06:58:33 EST 2019 | kylehunter
> yeah...I never had airflow volume problems with > Hellers. When I had to build the system I was > referring to, we had an old Speedline oven, and > the way it was configured if you didn't provide > enough airflow to the outer ca
winsouce.jpg)