Electronics Forum | Tue Sep 08 16:35:17 EDT 2015 | duso02
There are many liquid masking manufacturers. Some even use acrylic vice latex. Try Contronic Devices. They make their mask in multiple viscosities depending on how you will apply it and where.
Electronics Forum | Thu Jun 11 09:01:02 EDT 1998 | Dave F
| We have dispensed latex peelable solder mask, but want to begin printing. | What are your experiences with: | 1 Mask types ... latex versus vinyl? We're edging towards vinyl | 2 Stencil or screen? We're aiming towards stencil | 3 Metal or plas
Electronics Forum | Fri Nov 04 16:36:53 EDT 2011 | davef
tombstonesmt: Ammonia based masks can create solderability issues after they are removed. You can get non-ammonia based latex mask material but down side is slower cure and cost a little more as they have higher levels of latex etc
Electronics Forum | Tue Aug 04 14:39:46 EDT 2015 | tombstonesmt
Sarason, This idea has been brought to the table... The issue with the ammoniated latex is that any friction causes shear curing inside the valve. We did find a Techcon "Pinch Valve" that we will be running some samples through. It has a dispos
Electronics Forum | Tue Jan 17 16:43:03 EST 2006 | davef
If you are not washing and want to stay with a peelable mask the two basic types are vinyl and latex. Although we've seen some silicone and urethanes, they cost more. * Do not use latex peelable solder mask with a low residue soldeing process withou
Electronics Forum | Fri Aug 07 09:31:21 EDT 2015 | esoderberg
We use Humiseal T300 latex mask for over 17 years. No smell. That said we have been dispensing several ways. One is a Asymtek 718 in-line machine using a 1 gallon pressure pot and their DV7000 valve. It is an auger valve that has been highly successf
Electronics Forum | Tue Oct 03 18:09:06 EDT 2023 | glasscake
Try a liquid latex masking material. Youll most likely have to cover the hole with kapton, really drench the thing in the liquid latex to prevent the ultrasonic from damaging it then bake it at 50-70c for about 2-4 hours. With no bake its usually a 2
Electronics Forum | Tue Jun 03 03:46:07 EDT 2014 | akasi
Is there a peelable solder mask which can withstand an automated aqueous wash ? I need to prevent water ingress into SMT modules during the wash cycle.
Electronics Forum | Tue Jan 27 10:54:45 EST 2004 | patrickbruneel
I would suggest trying an acrylic peelable mask. In most cases peelable temporary masks are latex materials. Since you use an acrylic conformal coating it makes sense to use a mask with the same make up to avoid incompatabilities. Link to acrylic mas
Electronics Forum | Wed Aug 19 03:24:49 EDT 2015 | pcbman
I ordered few times of prototyping gold plating > pcb from China. How to i differentiate they are > ENIG or Flash gold? Hi,Friend , this is very easy to distinguish the ENIG and gold plating pcb, you can stratch the solder mask off and see the co