Electronics Forum | Wed Oct 13 12:54:44 EDT 1999 | Dave F
Mikeh: You can't let that stuff get to your carbon bed. Literally, you can watch your bed die. The clay coats the carbon, entombing it. I've heard talk of using a RO filter as a front-end buffer to the recycling system, but know of no one who has
Electronics Forum | Thu Oct 31 16:40:01 EST 2002 | dragonslayr
Steve- I was once an auto body repairman in an automotive assembly plant. We used lead for dent filler instead of bondo. It was much faster to use. No cure time like a plastic filler needs. Lead was absorbed through my skin from hand filing the lead
Electronics Forum | Wed Nov 26 19:10:05 EST 2014 | caurbach
While I can't directly answer your question, we've had the same problem here occasionally. Our wash parameters are roughly the same as yours. It seems to be correlated to the diameter of the cap (larger caps will balloon while most smaller caps are
Electronics Forum | Sat Aug 01 02:38:50 EDT 2015 | sarason
Is the company near to you, if so walk up to the back door, with a load of cash in hand and a suitable container. Another option get your hands on their formula and have it made up by a chemical batching company. If you can't do that get the MSDS and
Electronics Forum | Wed Jan 31 10:56:23 EST 2018 | dontfeedphils
I'm working on bringing up a new conformal coat process/workcenter and have a few questions I'm hoping someone might have experience with. Right now we're manually spraying both coating materials (1B31 and 1A33 from Humiseal) using HVLP guns. I run
Electronics Forum | Mon Jul 29 16:43:55 EDT 2002 | mcm4me
I have a customer with up to 8% scrap from one board supplier and 1% from another supplier for solder dewett and no wet over ENIG finish with mask defined pads. Initially I suspected mask residue on pads because of the no wets but I have come to find
Electronics Forum | Tue Dec 29 17:42:27 EST 1998 | Dave F
| Can anyone recommend a solder stop that can be applied by our PCB supplier. Our current material form Tamura Kaken is causing problems. | | The material should be capable of withstanding 1 Surface mount IR reflow cycle and 1 wave solder cycle. | W
Electronics Forum | Tue Apr 05 08:41:39 EDT 2005 | aj
Guys, I posted a thread on this sublect a while back and I thought we had it sorted but we have the same issue again. One of the SMT operators has chapped skin,sores which sometimes cause cuts. This looks extremely uncomfortable. We thought it was
Electronics Forum | Sun Sep 08 18:06:30 EDT 2013 | davef
Protect the board: If solder mask protects the board, the level of protection is limited and inconsistent. If you want protection, you need the be thinking conformal coating. Selective ENIG: I believe the reason solderability protection, except mayb
Electronics Forum | Fri Nov 22 05:04:07 EST 2019 | SMTA-Matthew
We have some circuit boards where the solder mask seems clear instead of green on top of some of the tented via pads. No gold deposited during the ENiG process and no solder sticks to it but why is it clear and does it have any correlation to the thi
