New Equipment | Rework & Repair Equipment
Flat Shockproof Vulcan Spudger SH-80 Double Beveled and Conical Ends. (6" x 1/4") The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for appl
New Equipment | Rework & Repair Equipment
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards. Beau Tech spudgers have many advantages compared with nylon/fib
Electronics Forum | Tue Aug 31 11:57:03 EDT 2004 | Kris
Hi Any body have any issues soldering tin lead solder paste with lead free terminations ? Components are leaded devices and chip components have read the theoritical discussions on the forum, need to know if any body has seen any real issues tod
Electronics Forum | Fri Feb 17 11:01:47 EST 2006 | amol_kane
with lead-free solders, one would expect to find less instances of tombstoning. this is because SAC alloys are not eutectic and melt over a range of temp (usually 217-220 deg C) instead of at a single temperature. therefore the forces due to solder s
Used SMT Equipment | Soldering - Reflow
The latest breakthroughs associated with the Mark 5 reflow system now provide you with an even lower cost-of-ownership. Heller's new heating and cooling advances deliver up to 40% reduction in nitrogen and electrical consumption. This makes the MK 5
Industry News | 2020-02-25 12:51:11.0
MIRTEC will exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The Dallas Expo is scheduled to take place Tuesday, March 24, 2020 at the Plano Event Center in Plano, TX, and the Houston Expo will be held Thursday, March 26, 2020 at The Stafford Centre in Stafford, TX.
Industry News | 2003-03-11 08:45:00.0
CAMtastic DXP is the latest version of Altium's complete CAM verification and editing system that bridges the gap between PCB design and manufacturing and facilitates communication between board designers, fabrication engineers, and their clients.
Parts & Supplies | Pick and Place/Feeders
DEK - SQUEEGEE KIT LEAD FREE MAGNA PRINT 457mm(2 x holders+2 x blades and 4 x paste deflectors ) ..450058 There are also other DEK parts for you !!!DEK MOTOR 107707 DRIVE BELT^RAIL WIDTH DEK 185938 DRIVE BELT^TABLE LIFT DEK 185934 DEK Q-250D
Parts & Supplies | Assembly Accessories
Detailed Product Description Features: 7 Channel Brand: KIC Part Name: X5 Reflow Profiler Model: X5 Condition: Original New Leadtime: 7days KIC X5 Thermal Profiler with SPC software and RF capability For Reflow Track More Data Points With 7,
Technical Library | 2013-01-24 19:16:35.0
The electronics industry has mainly adopted the higher melting point Sn3Ag0.5Cu solder alloys for lead-free reflow soldering applications. For applications where temperature sensitive components and boards are used this has created a need to develop low melting point lead-free alloy solder pastes. Tin-bismuth and tin-bismuth-silver containing alloys were used to address the temperature issue with development done on Sn58Bi, Sn57.6Bi0.4Ag, Sn57Bi1Ag lead-free solder alloy pastes. Investigations included paste printing studies, reflow and wetting analysis on different substrates and board surface finishes and head-in-pillow paste performance in addition to paste-in-hole reflow tests. Voiding was also investigated on tin-bismuth and tin-bismuth-silver versus Sn3Ag0.5Cu soldered QFN/MLF/BTC components. Mechanical bond strength testing was also done comparing Sn58Bi, Sn37Pb and Sn3Ag0.5Cu soldered components. The results of the work are reported.
Technical Library | 2010-05-12 16:21:05.0
Numerous studies have shown that greater than 60% of end of line defects in SMT assembly can be traced to solder paste and the printing process. Reflowing adds another 15% or so. In light of this fact, it is surprising that no simplified procedure for solder paste evaluation has been documented. This paper is about such a procedure.
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
Training Courses | | | PCB Inspection Courses
The PCB inspection courses focus on improving PCB yield and reliability through validation and detection of defects on electronics assemblies.
Training Courses | | | IPC-7711/7721 Specialist (CIS)
The Certified IPC-7711/7721 Specialist (CIS) training focuses on rework of electronic assemblies and repair and modification of printed boards and electronic assemblies.
Events Calendar | Wed Apr 18 00:00:00 EDT 2018 - Thu Apr 19 00:00:00 EDT 2018 | ,
Stencil Printing Process and Solder Paste Inspection – An In-Depth Look - SMTA Webtorial
Events Calendar | Thu Oct 03 00:00:00 EDT 2019 - Thu Oct 03 00:00:00 EDT 2019 | ,
IPC Tech Ed Webinar Series: Ball Grid Array (BGA) and Bottom Termination Component (BTC) Design and Assembly Challenges: Reflow Profiling to Achieve Low Defect Rates and Successful Assembly! – Part 2
Career Center | , | Production
Position Description: Wave Solder Operator Reports to: Production Manager Department: Manufacturing Job Description: Wave Solder Operator Responsibilities: � Operate wave-soldering machine. � Insure that established process c
Career Center | BANGALORE, India | Engineering,Maintenance,Production
Hi, I have 8 years experience in electronics manufacturing company. I have good knowledge in SMT process and equipment maintenance.i successfully completed more than 200 NPI's. I have good knowledge in SMT machine programming and maintenance
SMT Express, Volume 4, Issue No. 5 - from SMTnet.com Volume 4, Issue No. 5 Thursday, May 23, 2002 Featured Article Return to Front Page Book Review Reviewed by Dave Fish (davef ), Pandion Electronics, Inc. Title: Reflow Soldering
SMTnet Express, Septemeber 1, 2016, Subscribers: 26,288, Companies: 14,937, Users: 41,025 Reliability Study of Low Silver Alloy Solder Pastes Jennifer Nguyen, David Geiger and Murad Kurwa; Flex (Flextronics International) Sn3.0Ag0.5Cu (SAC305
GPD Global | https://www.gpd-global.com/lead-free-solder-paste-dispensing.php
. Leaded Solder Paste Dispensing Compare Solder Paste Dispensing for Leaded vs Lead-free Applications Solder Paste is used to make electrical connection between a PCB and component
| https://pcbasupplies.com/lead-free-solder-paste/
» Lead-Free Solder Paste -SAC305 Jet Dispensable Solder Paste Lead-Free Solder Paste -SAC305 Jet Dispensable Solder Paste $ 43.08 Purchase this product now and earn 4 Points