Electronics Forum | Thu Mar 23 08:34:45 EST 2000 | Shane Lay
Dave, Thank you for the information. We will be conducting several tests in the near future that will evaluate the corrosion/contamination response as it is our primary concern once we remove our aqueous processes. We are well aware of the effects
Electronics Forum | Thu Aug 05 12:02:48 EDT 2004 | Vince W
Go on the WEB and do a search of "Spray Fluxing" Several options should show up Good luck with your search
Electronics Forum | Sun Feb 03 08:12:38 EST 2002 | davef
I&J Fisnar [2-07 Banta Pl Fair Lawn, NJ 07410-3002 201-796-1477 Fax 201-794-7034 http://www.ijfisnar.com info@ijfisnar.com ] makes a very good quality bench-top liquid dispenser. A base machine costs about $10k. Programming is relatively easy, alth
Electronics Forum | Tue Mar 21 20:33:09 EST 2000 | Dave F
Shane: We don�t dispense, but we have thought about it. Several points about peelable solder masks in a no-clean (low residue) process: � Beware of latex peelable solder mask with a low res process without extensive testing. The problem is usuall
Electronics Forum | Mon Jun 05 12:30:24 EDT 2017 | deanm
Mike, The dispensable solder paste is ordered separately from the printed paste because it has a higher flux content. I would not feel comfortable mixing liquid flux into the printable paste. Ask your paste vendor if they have a dispensable version.
Electronics Forum | Wed Feb 13 13:32:15 EST 2002 | caldon
Liquid Control Corp May be able to intergrate a unit like you speak of. Contact Geoffrey Silver at : 215-918-0872 or silver@liquidcontrol.com. Best regards, Cal
Electronics Forum | Tue Sep 08 16:35:17 EDT 2015 | duso02
There are many liquid masking manufacturers. Some even use acrylic vice latex. Try Contronic Devices. They make their mask in multiple viscosities depending on how you will apply it and where.
Electronics Forum | Thu Sep 15 10:43:18 EDT 2016 | claudea2
Thanks to Bobpan we re connected our wipe system and all the air actuators work fine. I still have a problem with the cleaner fluid dispenser. It is not moving as it should to dispense the liquid when we do the command. I suspect the values in the c
Electronics Forum | Mon Jun 13 01:31:36 EDT 2005 | buchi79
Devef, The stand off height is 75micron. We only clean the product after underfill process. Dispense epoxy under the FC & cure it before aqueous wash. Samples are sent for LPC (liquid particle count) Test to ensure cleaniness. By the way, our plant
Electronics Forum | Fri Nov 09 07:29:02 EST 2001 | henriksn
Hi, I would just like to add, that in our prototype production we often mount doublesided pcb's with components ranging from 0402 to BGA-280 to QFP-100. Of course we also mount and solder the side with the BGA's and QFP's last. Like the others here,