Industry News | 2017-09-16 02:29:39.0
Heller Industries has been awarded the 2017 Global Frost & Sullivan Company of the Year Award for its surface mount technology (SMT) soldering equipment that enables Industry 4.0. - the automation and data exchange in manufacturing technologies.
http://www.gpd-global.com GPD Global expands the performance of its automated dispense systems to run fundamental Pick & Place operations. The same automated fluid dispensing machine is capable of dispensing fluids and also Pick & Place simple compo
http://www.gpd-global.com Tilt-and-Rotate configuration is available. Full featured programming makes conformal coating processes quick and easy. 3-axis Conformal Coating System for printed circuit boards that provides a reliable robotic platform f
http://www.gpd-global.com Conformal coating (SimpleCoat) demonstration of the Spray Valve and Volumetric Pump in action on the SimpleCoat system. The Spray Valve sprays HumiSeal 1B31 from a height of approximately 20 mm above the board. The Volumetr
http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to
Industry News | 2016-08-25 17:56:34.0
GPD Global's advanced Precision Auger Pump retrofits into your dispensing system to provide excellent dispense control and repeatability. Precision Auger Pump Integration provides your process development with a broad range of functionality.
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS) Recert.
The Certified IPC/WHMA-A-620 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC/WHMA-A-620 Specialist.
Technical Library | 2020-12-02 20:36:54.0
Industry 4.0 is a topic of much discussion within the electronics manufacturing industry. Manufacturers and vendors are trying to come to terms with what that means. In the most simplistic of terms, Industry 4.0 is a trend toward automation and data exchange within the manufacturing process. This basically requires connectivity and communication from machine to machine within the manufacturing line. The challenge is to collect data from each of the systems within the line and make that data available to the rest of the machines. Without test and inspection, there is no Industry 4.0. The whole purpose of test and inspection is to collect actionable data that may be used to reduce defects and maximize efficiency within the manufacturing line. The goal is to minimize scrap and get a really good handle on those process parameters that need to be put in place to manufacture products the right way the first time. For maximum efficiency, three inspection systems are required within the production line. These are solder paste inspection (SPI) post-solder deposition, automated optical inspection (AOI) post-placement, and AOI post-reflow. This requires a substantial investment; however, the combination of all three inspection machines is really the only true way to provide feedback for each stage of the manufacturing process.
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)
The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.
Industry News | 2021-05-14 05:35:57.0
MIRTEC announces that it has officially received IPC-2591 (CFX) Certification for its Award-Winning MV-6 OMNI 3D AOI Seriesand MS-11e 3D SPI Series.
