Electronics Forum | Wed Mar 19 15:59:40 EDT 2008 | rmitchell
Hi, I am having some problems with my CP6 placement changing in the Y axis. I had to move all parts by +.12mm this morning. Then after 20 boards the placement shifted too high by about .12 mm The IP stayed the same with the same pcb's and fid coo
Electronics Forum | Wed Dec 22 12:36:36 EST 2004 | rlackey
Hi Mark, Look on the bright side, if you want to change from HASL you've got the lead free issue which will allow you to evaluate all other finishes, and find the best one for you. Dave, have you seen any unleaded HASL finishes & any issues arising
Electronics Forum | Mon Aug 21 04:36:34 EDT 2006 | Rob
Yes, appropriate storage & component handling proceedures should be followed depending on the MSL (Moisture Sensitivity Level) class of the component. Some component suppliers are now marking the MSL class on the label, along with PBT (Peak Body
Electronics Forum | Mon Aug 27 08:08:20 EDT 2012 | rgduval
An ICT solution seems to be overkill for what you've described. What kind of volumes are you hand building? How many components are not marked? What is your current yield with the process you are using? What is/was your yield prior to implementing m
Electronics Forum | Wed Sep 30 13:09:12 EDT 2015 | ercdave1
Hello Rob, I was able to get the machine to zero, apparently replacing the circuit board on head 2 conflicted with head one even matching the jumper settings to the old board. Once I marked the head as not mounted, head 1 zeroed. I re-checked the ju
Electronics Forum | Wed Jan 17 02:52:55 EST 2018 | robl
Hi Mark, we use BOM Connector from Router Solutions. It took a while so set up, but works well in linking our part numbers to customer part numbers, and looking up part numbers on new BOMs. We also import the BOM Connector BOMs into our ERP, but th
Electronics Forum | Fri Dec 21 09:24:33 EST 2007 | rgduval
Andy, I think you'll find as many answers to your questions as you have people that post them. To that end, here are mine: Planning to pay off the machine...we took it as an overhead cost, and didn't directly correlate cost of the machine to job co
Electronics Forum | Mon Mar 02 15:54:15 EST 2009 | rgduval
That might because every CM has a different overhead rate. In general, your costs should be material+direct labor rate+overhead rate+markup and or profit margin. For your overhead rate, consider your non-direct labor, and your facility costs. Am
Electronics Forum | Tue Aug 26 14:25:49 EDT 2014 | rgduval
I've given up on my search for this solution, personally. I wasn't able to land the customer that it would have benefitted me for, and the company I was working for shuttered operations. But, with that said, if anyone is looking for a custom sized
Electronics Forum | Thu Jul 03 13:15:35 EDT 2014 | rgduval
If you are developing a cost model for quotation/estimation purposes, we would recommend time studying a handful of existing jobs/set up's that you have, and averaging your actual CPM rate. Then determining your cost to operate from there. This wil
