Electronics Forum | Sun Sep 18 08:28:13 EDT 2022 | dilogic
You can swap the board between machines, it's located on the front, down right (VME rack), where all "smart" stuff is locaated.
Electronics Forum | Fri Nov 16 11:42:58 EST 2018 | reckless
Thanks for the explanation! I'm trying to google and find out more about the sapphire not finding much info on it. Also, trying to better understand the whole philips/assembleon/yamaha history especially on the GEM Yamaha line. Not much out there.
Electronics Forum | Fri Nov 16 09:28:08 EST 2018 | robl
If you are gang picking from 6 reels in a row for the same part, so the head goes down twice for 12 components, which is easily done on the boards you have previously described, you should see 18K+ per hour with decent panelisation. On an LED panel
Electronics Forum | Thu Aug 10 13:26:02 EDT 2017 | dleeper
In my past life, I worked at a CM that used Mirae "Meridian" machines Universal Instruments "Genesis" machines. The universal instruments machines were much, much faster. What sort of head configuration did your Advantis machines have? The 30 spindl
Electronics Forum | Wed Mar 16 22:45:29 EST 2005 | MG Cyr
Thanks for the positive feedback. In addition our standard manufacturing validation, all of our Platform SM products (GSM, Advantis, Genesis etc.)include "on-board" CPK validation and "self calibration". In addition we do have a global relationship w
Electronics Forum | Thu Jun 14 04:20:26 EDT 2007 | sami
Dear ERhard.Our placer are Universal Genesis machines and the screen printer is DEK Horizon 02i . for Maian board the tact time in the placer is about 14 Sec and the printer is about 22 Sec. Means there is a big waste time . for Front pannel we are u
Electronics Forum | Fri Mar 11 13:03:08 EST 2022 | poly
I've just bought the pick and place machines (universal Genesis GX11 and GC30) and oven (RO300fc-c) but I am confused about printers. I've put in an offer for an MPM Accela (2006 or 2008) but I'm not sure if it's a good idea / deal. It's being sold i
Electronics Forum | Tue Jun 19 11:27:07 EDT 2007 | realchunks
But his placement machine time was 13-14 seconds. That's the goal. "Our placer are Universal Genesis machines and the screen printer is DEK Horizon 02i . for Maian board the tact time in the placer is about 14 Sec and the printer is about 22 Sec.
Electronics Forum | Wed Mar 28 16:19:41 EDT 2018 | dleeper
Quad didn't go out of business because they made stellar machines, but if you are running the same board all day long, you can get it dialed in where it's repeatable and reliable. Spares aren't expensive (at least by comparison)and there are lots of
Electronics Forum | Tue Nov 20 11:19:07 EST 2018 | spoiltforchoice
Ahh but you're missing the key points. The YSM40 is in no way ever intended to operate on its own, to keep those 4 heads busy they all need to be placing high volume parts, combined with a high throughput of PCB's probably in dual lane mode which in
