Electronics Forum | Thu Nov 28 09:42:51 EST 2002 | Claude_Couture
MPM SP200 are nice. Visual alignment with cameras. Get the one with dual head if you want metal squeegees. We have produced boards with .020" fine pitch with very good results. Unfortunatly, MPM does not sell those anymore, so you have to hunt for a
Electronics Forum | Mon Dec 02 08:39:07 EST 2002 | pjc
The MPM SP200 was replaced by the model SPM around 1994. They also have the model UP100, which is from the SMTech purchase. The UP100 is the low-end MPM semi-automatic. Information on the SPM & UP100 can be found at http://www.cooksonee.com
Electronics Forum | Thu May 15 15:23:08 EDT 2008 | vms
Hello Casper We have a stencil adapter for that machine, we sell a lot of mpm parts. Also know of another one of them you could get for spare parts. Replacement parts are next to impossible for it. Harry
Electronics Forum | Mon Apr 14 16:41:59 EDT 2008 | ck_the_flip
The added benefit to MPM SP's is that, it forces the operator to look at quality. She won't have 2d or 3d to rely on. Also, it places heavy emphasis on a good setup.
Electronics Forum | Thu May 15 15:12:03 EDT 2008 | mgrimes
I have a copy of this manual I could send to you. You can email me at matt@easiky.com.
Electronics Forum | Thu Aug 12 18:43:49 EDT 1999 | Wayne S.
Hello Having a problem with bridging on 20mil pitch qfp, only on the lead groups where squeegee goes over width of apertures. Using MPM sp-200 semi-auto, chem-etch stencil, 9-10mil width opening 100 durometer blade. Getting "tails" on deposits. Trie
Electronics Forum | Thu Aug 12 20:17:12 EDT 1999 | Kelly Morris
| Hello | | Having a problem with bridging on 20mil pitch qfp, only on the lead groups where squeegee goes over width of apertures. Using MPM sp-200 semi-auto, chem-etch stencil, 9-10mil width opening | 100 durometer blade. Getting "tails" on deposi
Electronics Forum | Thu May 15 09:51:49 EDT 2008 | cbroegger
I have bought an old SP-2400 screen printer, very cheap. I have "repaired" it from my best knowledge, replaced all pneumatic tubes that were in bad shape, replaced some logic in the "controller", and changed it from 110v operation to 220v. Well, to
Electronics Forum | Wed Nov 03 16:35:03 EDT 2021 | smtusa
We are big mpm fans especially the UP2000/2500 dos based. I just got an MPM SP2000 but feel thats too big. I would like something even smaller for an office setup. I looked up the MV100 and it came up with a pic of Quad. It looked pretty big in p
Electronics Forum | Fri Nov 11 11:02:23 EST 2005 | russ
i would look at an SPM from MPM(speedline) or an SP200 from Europlacer (speedprint not speedline) We have used both of these machines with great success from 16mil pitch qfps to .5mm pitch uBGAs.
