Electronics Forum | Thu May 15 15:12:03 EDT 2008 | mgrimes
I have a copy of this manual I could send to you. You can email me at matt@easiky.com.
Electronics Forum | Tue Mar 30 06:27:22 EDT 2010 | ristikas
It happens on the middle of the stecil cleaning. The camera and the cleaner will stay under stencil in half way back. Then machine asking the initate the motors. If to press initate then the pcb stopper will hit the rails. Usually we move camera and
Electronics Forum | Fri Feb 03 12:25:34 EST 2012 | cyber_wolf
The camera is probably clipping the top of your board when it is reading fids. This causes the motor to lose steps. Manually load a board to vision height and drive the camera over the board to check for clearance issues.
Electronics Forum | Thu May 31 23:29:57 EDT 2018 | judy49
Hi dear We are the manufacture for the smt stencil roll wiper for the DEK .EKRA MPM ect printer machine .any size can be customized . Hope we can have a chance to support u .
Electronics Forum | Mon May 07 09:11:15 EDT 2018 | dleeper
Try Precision Placement Machines: http://www.goppm.com Or Cardinal Circuit: https://cardinalcircuit.com Both offer support for MPM printers. Insert standard "I receive no benefit nor compensation for the aforementioned companies."
Electronics Forum | Fri Apr 26 08:04:59 EDT 2019 | griinder
We solved the issue. A stencil must be clamped in the machine to allow the command. The stencil serves to hold the board level, while the pins are set. The machine is smarter than us.... :/
Electronics Forum | Thu Mar 04 22:45:03 EST 2021 | tomek_k
Hi Mam do Momentum. Myślę, że jest bardzo zbliżony. Jeżeli cię to interesuje mogę wysłać. Pozdrawiam Tomek
Electronics Forum | Mon Apr 10 14:11:27 EDT 2023 | proceng1
https://drive.google.com/drive/folders/1-fVUWuGPpu5EyGmKiPJVwAKwVxkdfuxl?usp=sharing Mostly Accuflex stuff, which is of course very similar to the UP1500.
Electronics Forum | Tue Jul 18 11:55:55 EDT 2023 | cyber_wolf
As I said, the intent of the "stepped" feature is to aid in paste release. Continuous is normal mode. I believe the manual explains these features in depth.
Electronics Forum | Tue Oct 24 11:35:22 EDT 2023 | proceng1
https://drive.google.com/file/d/1am6jqwot_G5ivE8gZos7FcyBf3jcl3xq/view?usp=drive_link This is for the ACCUFLEX, but we had both and most of it's the same.