Electronics Forum | Wed May 08 10:40:48 EDT 2013 | huske
We have had this problem before, and Phil was pretty close. On the hydra where the vacuum tubes are connected to the tools shafts you should see a red light inside there. this light locates a lazer cut mark on each of the tool shafts, this lets t
Electronics Forum | Wed Mar 04 12:51:41 EST 2020 | bk
That error means your hydra z did not reach it's specified position. With the machine on you should be able to manually push the hydra down and let it come back up. Make sure it isn't being held up or hitting anything as goes down. Lots of times a pa
Used SMT Equipment | AOI / Automated Optical Inspection
YAMAHA AOI YSi-V MACHINE KLT-000 1. Model: Yamaha ysi-v 2. Target substrate: l610 x w560 (maximum) ~ l50 x w50 (minimum) & supports l750mm super long substrate (optional) 3. Resolution: visible light (red/green/blue) & infrared (infra-
| https://www.wesource.com/solder-paste-and-pcb-inspection-machines/parmi-spi-50t-tabletop-solder-paste-inspector-id-700272-8/23/
: High frame rate C-MOS sensor 18 x 18 um pixel • Software Version: v7.11.3 • Error: license container not available. • Error: null ERROR CODE : 2 Resolution: • Scan: 20 µm • Lateral: 18 µm • Height: 0.2 µm Asset #700272 Products You May Like VI Technology 3D SPI Light Source
Lewis & Clark | https://www.lewis-clark.com/product/2011-assembleon-mg-5-pick-and-place/
(Feeders Sold Separetely) 2×24 Position Fixed Feeder Bank Front Single Placement Beam with 5 Heads Front Line Array Camera with Side Light
