Electronics Forum | Tue Oct 06 17:36:20 EDT 2020 | hearsehauler
Have used stencils for low volume paste printing for 18 yrs. New job uses jet printing (MY500). But machine is limited to .33mm dot size. Parts used here have pad sizes that are .25mm or smaller, so paste touches between pads when printed. Thankfully
Electronics Forum | Tue Apr 05 18:50:00 EDT 2016 | bootstrap
Roughly what is the price of the Essemtec Scorpion? Is that capable of applying solder paste for 0201 discrete components and 0.40mm to 0.50mm pitch BGAs? Also, what is the difference between my500 and my600? Are both currently made models? And r
Electronics Forum | Sat May 29 13:53:18 EDT 2010 | jandon
MY500 minimum dot diameter is 0.33 mm (0.013”) so you still need stencil for smaller dots. You are liable to couple of jet printing solder paste manufacturer and there where I live, only official Mydata distributor can sell those solder pastes. Also
Electronics Forum | Mon Oct 09 09:16:45 EDT 2017 | vchauhan
I have used Mycronic MY500 & MY600 printers in > the past. Wave goodbye to screens, it's > really quick & easy to modify print programs, > changes can be made and applied in 5 minutes > instead of waiting 24 hours for a new > screen. They prin
Electronics Forum | Wed Oct 07 15:23:10 EDT 2020 | spoiltforchoice
MyCronic are literally the only ones in the market, Essemtec do Jet printing but make no attempt to sell it as a full printer replacement in the way MyCronic do. I was told by MyCronic "The MY500's are reducing in numbers now and spares support is co
Electronics Forum | Wed Jan 27 15:23:25 EST 2016 | dyoungquist
You can buy an awful lot of stencils for $200K but where/how are you going to store all of those stencils? There is a certain $$$ value to all the space it will take to store them. I have been told by a Mycronic salesman that they are working on qu
Electronics Forum | Fri Oct 14 18:30:13 EDT 2005 | Mika
Absolutely right and furtermore, when does one have a glance of the future whith all spectrum of its perfomance; without looking in the past? Maybe You will catch me, despite my english gramma (or maybe totally un-understood). We have seen this befo
Electronics Forum | Fri Jun 08 13:08:46 EDT 2012 | andydavis
We have a My500 at out plant. We are high volume and low to medium volume. It is a great machine and is a great solution to some problems that a conventional screen printer cant get around. For example, we have some producets that are not flat on
Electronics Forum | Wed Mar 02 02:07:06 EST 2016 | mbass
3000 components per side and yes the actual print cycle is longer (13 minutes) against the DEK print stroke of 30 seconds. But overall the whole cycle time of set up etc is way less on the MY500. The ability of the machine to adjust volume of paste o
Electronics Forum | Sat Apr 21 14:50:17 EDT 2012 | edmentzer
We are using SN100C in both our wave and selective machines and have very good results. We also using it for ROHS hand soldering. It flows better than SAC305, the joints are shinny just like Sn63/37. We are looking into using SN100C as our paste b
