Electronics Forum | Mon Jan 25 01:24:27 EST 2010 | sparrow
If the bumps are so small, I do not see any reason for considering Mydata, Siemens or any SMT p&p machine. Datacon's die bonders are very good ones. In your case, I would keep using them.
Electronics Forum | Thu May 06 19:25:41 EDT 2021 | markhoch
oooff... be careful of punch dies. They leave a lot of debris and can stress components on the PCB. If you're using them, be sure to verify stress levels with a strain gauge test. Semi-fractured components can pass test, yet eventually cause latency
Electronics Forum | Mon Oct 18 08:02:35 EDT 2010 | marusha
Hello, colleagues! Please help make a choice! (MY500 + MYDATA MY100 + Heller Mk1707) or (Dec Horizon03 + Samsung 421 + Essemtec RO400FC-C) or very cheap Korean equipment (Sj InnoTech; HP-520 + Mirrae Mx350P + TSM; A70-i71). The volume of required c
Electronics Forum | Mon Jan 25 01:05:43 EST 2010 | wmeliane
Thanks for feedback. We already have 2 Datacon machines as we are mostly building microelectronics modules. The FC dies are pretty small and light. Bumps are
Electronics Forum | Thu Jan 28 16:27:05 EST 2010 | Howard
9 micron placement accuracy. Includes Flipper unit, dispenser and double nozzle changer. Any interest? Howard (AIRVAC)
Electronics Forum | Mon Feb 15 21:24:11 EST 2010 | seabas
The CX-1 is a good choice. As accuarte as a die bonder, and as fast as an SMT placer. We love ours.
Electronics Forum | Wed Jan 27 22:39:46 EST 2010 | wmeliane
Thanks for the recommendations. We have settled on the new Juki CX-1. Juki states that the machine is a hybrid between a MCM placer and an SMT placer. This machine, if it is capable to do what Juki says it can do, is exactly the machine we need. Ma
Electronics Forum | Wed Apr 07 10:06:44 EDT 2004 | smtpro
It sounds like bartector would work well with our fuji's but we would really like to have a system for our mydata's also. Is anyone using the crestsolutions system and does it work well? Thanks
Electronics Forum | Wed Mar 30 17:35:18 EST 2005 | Grant
Hi, Yes, it was fun reading this thread again. We initially upgraded our MY9 to a MY12 with line scan camera, but it was still too slow. We considered getting a second MYDATA, but decided to go with some FuJi XP 142, and 242 machines, with a second
Electronics Forum | Sat May 29 15:58:37 EDT 2004 | Patrick Tarell ... Automation Engineering Jabil Circuit
Hello Alan! We have used both chipshooters, we also have a Mydata with the hydra head... We switched entirely from Fuji CP7 to the UIC HSP4796 and now HSP4797. The CP7 is a nice machine but we were very unhappy with the support structure within Fu
