Electronics Forum | Thu Aug 27 15:40:50 EDT 1998 | Justin Medernach
| | | | | Hi, | | | | | Does anyone has experiences in reflowing Ceramic BGA and found solder wicking ? Solder wicking has the syndrome that solder being wick from the pad and ended up in the leads. | | | | | We have rule out the possibility of not p
Electronics Forum | Thu Oct 31 17:34:37 EDT 2013 | hegemon
Keep in mind that you may need to assure that there are no pure tin finishes remaining on your parts. A general idea is that parts with pure tin (RoHs) finish will need to be plated with tin-lead solder to avoid the possibility of tin whiskers formi
Electronics Forum | Fri Jun 12 15:29:51 EDT 2009 | grantp
Hi, We just had delivered one of these and it's incredible. It's an amazing machine, and watching it load such a large board totally accurately, from end to end is amazing. Apparently we took delivery of only the second machine to ship in the world
Electronics Forum | Fri Oct 14 15:44:30 EDT 2005 | fastek
Yes....interesting. Word is this better be successful for them or they are done. At first glance my issue would be what impact do solder paste "dots" have in the following areas compared to stenciled paste: 1) Controllable with regards to volume 2
Electronics Forum | Wed Jun 04 00:28:27 EDT 2008 | chrispy1963
There are a couple of things that you can do. First thing to do is take a flashlight and shine it in the card edge connector of slot 2 and see if a passive component or any other part worked its way into that slot. This will cause multiple leads in
Electronics Forum | Mon Aug 27 09:56:00 EDT 2001 | stefan
I wonder what kind of equipment the board designer had in mind? Are you shure you can do the board with a Mydata ? Where do you put the tray for your 20 mil QFP's? 10 mm thick plus component height also appears to be a problem. Multitroniks can do la
Electronics Forum | Mon Jul 16 16:28:18 EDT 2012 | mikesewell
I'm somewhat frazzled by this one, not being too familiar with the MYs. Head is clean, tried different tools, same tool# from another MY, and have run the Centering Base Level Calibration to no avail. The component heights are correct and the par
Electronics Forum | Fri Mar 24 16:45:03 EDT 2023 | tey422
I believe I was working with the early MY12 model too. Yes, the X-wagon blue ribbon cable were showing wear and tear very fast. Another frequent break downs were the center-jaw, ribbon broke. Most of the Mydata repairs can be done inhouse with spar
Electronics Forum | Tue Apr 05 12:01:17 EDT 2005 | blueflag
Thanks for reply we have found a blown fuse on the back plane for the mot-z pcb . But we now have problems with Z height, i am trying to auto-teach devices from the tray wagon (qfp etc) and it is not always lowering the nozzle to the component. i ha
Electronics Forum | Wed Dec 14 12:48:21 EST 2005 | grantp
Hi, A second hand TP9-2U MYDATA could be picked up very low cost, however it will only load a single component at a time, which could be ok for your jobs. However if your running 0402, I am not sure if that model will do it accurately. Your machin
