Electronics Forum | Fri Apr 08 08:35:44 EDT 2005 | Grant
Hi, What are you doing for reflow. Sounds like a cheap MYDATA TP machine second hand might do the trick, but don't know if it could do 0201 though. You can get a fairly ok manual stencil printer that might do the trick. We had one that had a linear
Electronics Forum | Wed Jul 20 16:08:34 EDT 2005 | grantp
Hi, I think the comment about the board height is because the MYDATA checks the board height each time it loads a tool so this is eliminated from being an issue because the machine knows the PCB height. I don't think it's so much what height the PCB
Electronics Forum | Thu Apr 07 07:17:54 EDT 2005 | cyber_wolf
Colin, At this point you may consider calling in Mydata. I told you the basic things I have seen cause your problems. It sounds as if you may have a bad card, and or short somewhere. Possibilities: XWB Small booster on the front of the computer bo
Electronics Forum | Thu Sep 27 14:47:33 EDT 2007 | kpm135
You could try taking a look at the jet printer from MYData. http://www.mydata.com/MYWEB/Corp.nsf/$all/C7BD0068DB97D290C12571E80052A528 I have no idea about price or how well it works but it sounds like an interesting replacement for stencil printing.
Electronics Forum | Wed Sep 30 06:25:14 EDT 2015 | strongbyte
I am looking to buy a Flexible magazine for a Mydata TP9-UFP I have seen both TMCFlex and TMDFlex magazines available, does anybody know the difference between the two and whether they are compatible with my machine. I spoke to a Mycronic engineer
Electronics Forum | Tue Jan 08 14:58:33 EST 2002 | edmentzer
It sounds like an interesting idea. I have ask MYDATA about a user group, but they always act like it would not a good idea. I think every user has something to share or a question that could answered by someone who has "been there done that". We
Electronics Forum | Wed Apr 07 10:06:44 EDT 2004 | smtpro
It sounds like bartector would work well with our fuji's but we would really like to have a system for our mydata's also. Is anyone using the crestsolutions system and does it work well? Thanks
Electronics Forum | Tue Aug 17 13:23:14 EDT 2004 | cyber_wolf
We have the same machines and same software. We have not seen this problem. I agree, sounds like your hard drive is taking a dump.
Electronics Forum | Thu Dec 23 13:38:25 EST 2004 | clampron
Over The Hill, Sounds like you may have an incorrect height specified on a package causing the tool to slam into the board. The most likely cause is removing a magazine while the machine is running but I too have perfect operators who NEVER do that.
Electronics Forum | Tue Aug 09 14:07:36 EDT 2005 | bobpan
Could you not second source a shaft on an old junk machine from one of these companies that sell used equipment?? Probably a pain in the $@#$%^ though. Good luck...one way or the other it sounds to me like your going to get the shaft....haha... chow
.png)
