New Equipment | Coating Equipment
3% accuracy Being totally air operated the NEW Nano-Coat Dip Systems are totally safe to use with all coatings including flammable liquids and for the very widest range of applications. Dip coating is the most effective method of applying a confor
Technical Library | 2013-03-12 13:25:18.0
High density and miniaturized circuit assemblies challenge the solder paste printing process. The use of small components such as 0201, 01005 and μBGA devices require good paste release to prevent solder paste bridging and misalignment. When placing these miniaturized components, taller paste deposits are often required. To improve solder paste deposition, a nano-coating is applied to laser cut stencils to improve transfer efficiency. One concern is the compatibility of the nano-coating with cleaning agents used in understencil wipe and stencil cleaning. The purpose of this research is to test the chemical compatibility of common cleaning agents used in understencil wipe and stencil cleaning processes.Compatibility of Cleaning Agents With Nano-Coated Stencils
New Equipment | Solder Paste Stencils
DEK’s Nano-ProTek technology is a permanent, hydrophobic nano-coating that, when applied to the bottom-side of the stencil foil and stencil aperture walls, minimizes solder paste’s ability to stick to the foil surface. Up to a 10X increase in the num
Technical Library | 2019-03-13 15:19:55.0
It is well documented that Nano coatings on SMT stencils offer many benefits to those assembling PWBs. With reduced standard deviation and improved transfer efficiency nano coatings can provide, there is also a cost. As PWB assemblers work to justify the return on investment, one key question continues to arise. What is the durability or life of these coatings and what can be done in the print process to maximize the life of the coatings?This paper addresses durability of the coatings in relation to the number of print cycles and underside wipe cycles applied as well as materials used on the underside wipe process. Different parameters will be applied and data will be collected. The results of this study will be summarized to help those using or considering the use of these nano coatings to improve their print process and suggestions will be given to maximize the life of the coatings.
Technical Library | 2021-11-17 18:53:50.0
The demand for product miniaturization, especially in the handheld device area, continues to challenge the board assembly industry. The desire to incorporate more functionality while making the product smaller continues to push board design to its limit. It is not uncommon to find boards with castle-like components right next to miniature components. This type of board poses a special challenge to the board assemblers as it requires a wide range of paste volume to satisfy both small and large components. One way to address the printing challenge is to use creative stencil design to meet the solder paste requirement for both large and small components. ... The most important attribute of a stencil is its release characteristic. In other words, how well the paste releases from the aperture. The paste release, in turn, depends on the surface characteristics of the aperture wall and stencil foil. The recent introduction of new technology, nano-coating for both stencil and squeegee blades, has drawn the attention of many researchers. As the name implies, nano-coated stencils and blades are made by a conventional method such as laser-cut or electroformed then coated with nano-functional material to alter the surface characteristics. This study will evaluate nano-coated stencils for passive component printing, including 01005.
Technical Library | 2017-09-28 16:36:33.0
These nano-coatings also refine the solder paste brick shape giving improved print definition. These two benefits combine to help the solder paste printing process produce an adequate amount of solder paste in the correct position on the circuit board pads. Today, stencil aperture area ratios from 0.66 down to 0.40 are commonly used and make paste printing a challenge. This paper presents data on small area ratio printing for component designs including 01005 Imperial (0402 metric) and smaller 03015 metric and 0201 metric chip components and 0.3 mm and 0.4 mm pitch micro BGAs.
NanoSlic™ Gold is our top of the line spray on coating applied to our UltraSlic™ solder paste stencil, which gives previously unseen performance benefits in transfer efficiency. The NanoSlic™ Gold coating also gives the benefits of improved under-ste
LASER CUT STAINLESS - LASER CUT PhD - LASER CUT FG - ELECTROFORM - MULTI-LEVEL - NANO COATING - REWORK STENCILS PRECISION MESH SCREENS FOR PRINTING INKS, ETC CHEM-ETCH AND LASER CUT METAL PARTS (SHIELDS, SHIMS, MASKS, ETC.) WE PROVIDE SMT STENC
Industry Directory | Manufacturer
Manufacturer of Laser cut stencils, thick film screens, large format screens. Variety of stainless steel materials and mesh, ITAR registered. Member of SMTA, IMAPS and IPC.
Industry Directory | Manufacturer
Asahitec offers high precision and high quality products guaranteeing only the best in photoengraving and imaging technologies. Asahitec offers world class products without compromising on quality and is respected by customers.
