Electronics Forum | Mon Apr 13 08:47:09 EDT 1998 | Bob Silveri
| | | | | | | We are having a bridging problem with SOIC 14,16 and 20 pin devices during flow solder of the bottom side of our boards. This bridging occurs about half way up the lead between the board and the body of the IC. The chip parts are no
Electronics Forum | Wed Apr 15 14:53:06 EDT 1998 | D. Lange
| | | | We are having a bridging problem with SOIC 14,16 and 20 pin devices during flow solder of the bottom side of our boards. This bridging occurs about half way up the lead between the board and the body of the IC. The chip parts are no proble
Electronics Forum | Tue Sep 22 12:58:18 EDT 1998 | Chyrs
| How can I solve the small solder ball in the N2 W/S ? | The Oxygen level is 10000~20000ppm & no-clean flux. Yuen, Sorry I an't got an answer, just more questions. 1-2% O2 in your wave solder - are you running membrane generated nitrogen? I don't
Electronics Forum | Fri Jul 06 12:07:07 EDT 2001 | nwyatt
I have been researching lead-free paste for a while now and I will share with you what I can. Firstly, SnAgCu seems to be the common industry choice. It really depends on your application - the cell phone/pda sector is primarly using different comb
Electronics Forum | Thu Feb 17 11:38:53 EST 2000 | Steve Thomas
We appear to have solved a major reflow process problem (poor quality joints on a 20 mil QFP100...excessive solder left on the lead leg, not much left for a joint) with a design change to the board. We gave ourselves considerably more room for a hee
Electronics Forum | Thu Feb 17 11:38:53 EST 2000 | Steve Thomas
We appear to have solved a major reflow process problem (poor quality joints on a 20 mil QFP100...excessive solder left on the lead leg, not much left for a joint) with a design change to the board. We gave ourselves considerably more room for a hee
Electronics Forum | Wed Jun 12 08:24:03 EDT 2002 | davef
Tough. 0402 capacitors are more prone to tomb stoning than resistors. Tailor your process to the 0402 and let the other stuff fall where it falls. Search the fine SMTnet archives for discussion on tomb stoning. Consider: * Changing paste. * Apply
Electronics Forum | Thu Jun 13 06:08:57 EDT 2002 | edahi
guys thanks for the suggestions... DaveF, *Changing paste EricD: Yes we are considering that as a point. Because I believe the paste we are using are in syringe packaged and designed for dispensing. We are using an Indium SMQ75 paste and current
Electronics Forum | Wed Sep 07 04:28:26 EDT 2005 | Slaine
were looking at paste, wire, preforms and solder bars (for solder pots), concentraiting on HMP, sn62,96S, and 2 different sac alloys, we also have 7 different fluxes and 16 temination inks (which were also having to change for RoHS because the ink co
Electronics Forum | Thu Oct 05 11:40:49 EDT 2006 | Mario Scalzo, SMT CPE
David, We have seeing this more and more in the recent weeks. In a nut shell, yes; we believe that the voids that you are seeing are from the trapped air in the via from printing over it. If you could remove the Kapton tape, this might help. Also
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682
