Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Industry News | 2016-06-22 15:33:28.0
Based on its recent analysis of the surface mount technology (SMT) reflow soldering equipment market, Frost & Sullivan recognizes Heller Industries, Inc. with the 2016 Global Frost & Sullivan Award for Growth Excellence Leadership. Heller Industries has made remarkable improvements to its product and technology portfolios over the last 10 years to emerge a top participant in the SMT reflow soldering equipment market.
Industry News | 2023-04-11 09:52:04.0
MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems at SMTconnect, scheduled to take place May 9-11, 2023 in Nuremberg, Germany. The company will showcase a total of five (5) Inspection Systems specifically designed to address the full spectrum of inspection requirements associated with the electronics manufacturing industry in Hall 4A, Stand 128.
Industry News | 2019-11-12 13:01:33.0
MIRTEC has won an EM Best of Industry Award in the category of Automated Optical Inspection for its MV-6e OMNI. The award was presented to Bentec Distributor Accurex during a ceremony that took place 26 September at the Stellar Gymkhana in India. Bentec is the Managing Partner for UK/Ireland and India for MIRTEC.
Industry News | 2021-01-17 17:28:43.0
MIRTEC is pleased to announce that VEXOS has selected MIRTEC as their 3D AOI 'Partner of Choice' based on key performance indicators including Inspection Performance, Gage R$&R, Ease of Programming and Customer Support.
Industry News | 2008-07-03 21:21:50.0
OXFORD, CT � July 2, 2008 � MIRTEC Co. Ltd. announces that sales revenue for its North American Sales and Service Division grew by more than 81 percent for the first six months of fiscal 2008 with respect to 2007 results.
Industry News | 2014-02-17 20:17:14.0
MIRTEC, “The Global Leader in Inspection Technology”, will premier its complete line of 3D AOI, and SPI Inspection Systems at IPC APEX 2014 booth #2263.
Industry News | 2013-09-13 17:01:33.0
MIRTEC, “The Global Leader in Inspection Technology”, will exhibit its award-winning line of 3D AOI and SPI Inspection Systems at SMTAI 2013 booth #722. This three-day event is scheduled to take place October 15-16, 2013 at the Fort Worth Convention Center in Texas.
Industry News | 2009-03-16 18:07:28.0
OXFORD, CT � March 2009 � MIRTEC, �The Global Leader in Inspection Technology,� announces that it will introduce the latest advancements to its MV Series of AOI systems as well as unveil the company's first In-Line SPI System, the MIRTEC MS-11, in booth 147 at the upcoming APEX exhibition & conference scheduled to take place March 31- April 2, 2009 in Las Vegas.
Industry News | 2010-10-01 00:32:52.0
MIRTEC, “The Global Leader in Inspection Technology”, announced that it will premier its complete line of inspection systems at in booth #7326 at the upcoming SMTA International, scheduled to take place October 26-27, 2010 at the Walt Disney World Swan and Dolphin Resort in Orlando, FL.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
