Electronics Forum | Fri Sep 05 12:15:05 EDT 2008 | cyber_wolf
We have 5 ovens that we use this oil on. Its like $23.00 per pint from the manufacturer. But they say you have to buy a case of 24. I just went ahead and bought it from Vitronics.
Electronics Forum | Tue Oct 16 11:32:48 EDT 2007 | cyber_wolf
FYI: This seems to be worse depending on the oven....I think it may have to do with the way the machine exhaust. I have used the Fuchs on our Omniflow and on our XPM's.(Pb Free profiles) The Omniflow stinks the whole shop up....the Vitronics do not s
Electronics Forum | Fri Oct 12 16:29:21 EDT 2007 | dyoungquist
When we bought our Heller reflow oven, the installation technician recommended using Oberon chain lube part # 680784(0) when we needed to purchase more oil for our chain. I just went to the oberonlube.com website and could not find that part number.
Electronics Forum | Wed Jul 01 13:17:11 EDT 2015 | emeto
You have to keep the oil containers for the chains loaded with oil. The procedure is automatic and you will run it based on your usage. Other than that our 10zone Pyramax is running for 5years without any failure.
Electronics Forum | Tue Dec 01 14:47:57 EST 2009 | kjs123p
I am wondering what other Conceptronic users are using to oil the chain, lubricate the lead screw, and the grease used on the chain drives. I have contacted Conceptronic, and they gave me recommendations, but I am having trouble contacting them. Than
Electronics Forum | Tue Dec 01 17:50:43 EST 2009 | swag
This is cut and paste from a Conceptronics Document - hope it helps you: Following are the lubricants recommended for oven maintenance: 1. To lubricate the conveyor chain use: A. Biral BIO30 -synthetic high temperature oil (highly recommended)
Electronics Forum | Thu Apr 15 01:29:35 EDT 2004 | pyro747
Hello Everyone, I am having a pin chain speed problem. The speed of the chain will slow down after start up of the oven. Example if you set the conveyer to run at 41 in/min, as the oven warms up of conveyer will slow down phycally but won't chan
Electronics Forum | Mon Oct 14 03:03:34 EDT 2002 | msimkin
Mike, I have been using a fully synthetic motor oil on the links of my chains of my Hella for 7 years now, and have had no problems. As long as you do not place the oil on the fingers, where it makes contact with the PCB, then you will have no probl
Electronics Forum | Wed Aug 09 12:18:06 EDT 2006 | PR
We had to replace the chains on our Omni as well. We used a non-approved oil which build up so much carbon the links would not move. Since using the high temp oil they recommend, no problems.
Electronics Forum | Fri Jun 01 14:13:50 EDT 2018 | jsmith01
Does anyone have a good supplier of High Temp Chain Oil for a reflow oven in the United States?
