.png)
Industry Directory | Equipment Dealer / Broker / Auctions / Manufacturer
Lewis and Clark is your #1 Pre-Owned Surface Mount and In-Circuit Test equipment supplier. We offer a variety of equipment solutions at a significant cost savings over new.
Industry Directory | Equipment Dealer / Broker / Auctions / Manufacturer
Focusing on the SMT field for more than 15 years, QYSMT has been committed to meeting the needs of customers and partners. Our mission is to provide the best solutions while helping to reduce costs and increase efficiency.
Introducing the ezCLIP universal stop clip for PCB magazine racks. The ezCLIP system was created to allow electronics manufacturers who manually load/unload PCB magazine racks a simple way to distinguish required spacing between boards and to prevent
Nordson ASYMTEK’s Fids-on-the-Fly™ option is up to 5.5X faster than the traditional stop-and-capture mode for locating fiducials. Reducing time spent performing this essential, non-dispense routine can increase UPH as much as 35 percent. Fiducials a
Electronics Forum | Wed Dec 23 03:33:14 EST 1998 | Charles Stringer
Can anyone recommend a solder stop that can be applied by our PCB supplier. Our current material form Tamura Kaken is causing problems. The material should be capable of withstanding 1 Surface mount IR reflow cycle and 1 wave solder cycle. We need t
Electronics Forum | Tue Dec 29 17:42:27 EST 1998 | Dave F
| Can anyone recommend a solder stop that can be applied by our PCB supplier. Our current material form Tamura Kaken is causing problems. | | The material should be capable of withstanding 1 Surface mount IR reflow cycle and 1 wave solder cycle. | W
_meitu_17.jpg)
Used SMT Equipment | Chipshooters / Chip Mounters
BTW, we have sepcialzied in SMT field over 12 years and support one-stop SMT solution for our customers. Including SMT equipment and spare parts, such as Loader and Unloader, Reflow oven, Nozzle, feeder, motor, PCB board ect. We can also customize
.JPG)
Used SMT Equipment | Chipshooters / Chip Mounters
BTW, we have sepcialzied in SMT field over 12 years and support one-stop SMT solution for our customers. Including SMT equipment and spare parts, such as Loader and Unloader, Reflow oven, Nozzle, feeder, motor, PCB board ect. We can also customize
Industry News | 2013-01-16 19:22:48.0
GPD Global will exhibit in Booth #2633 at the upcoming IPC APEX EXPO. Live demonstrations will be given for a number of systems from the company's dispensing line.
Industry News | 2016-09-14 20:57:09.0
GPD Global will exhibit and have live demonstrations of the Continuously Volumetric Pump in Booth# 424 at the upcoming SMTA International 2016 Conference and Exhibition.
Parts & Supplies | Chipshooters / Chip Mounters
QYSMT has specialized in SMT field over 12 years, we support one-stop SMT solution for customers. Including SMT equipment and spare parts, such as Reflow oven, Chip mounter, Loader and Unloader, feeder, nozzle, motor ect. Should you have any need,
Parts & Supplies | Pick and Place/Feeders
QYSMT has specialized in SMT field over 12 years. We support one-stop SMT solution for our customers, including equipment and spare parts. Such as Reflow oven, Loader and Unloader, feeder, nozzles ect. Email : allen@qy-smt.com Skype/wechat :
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Technical Library | 2019-05-21 00:21:26.0
Continue to talk about the dust removal from temperature humidity test chamber. Cleaning and maintenance: 1) Pls remove internal impurities inisde chamber before operation. 2) The power distribution room should be cleaned at least once a year, and the dust can be removed by vacuum cleaner. 3) The exterior chamber must also be cleaned more than once a year, which can be wiped with soapy water. Inspection and maintenance of humidifier: The water storage in humidifier should be replaced once a month to ensure clean water quality, humidifying water tray should be cleaned once a month to ensure smooth flow of water. The inspection of over-temperature protector:during the test: If the temperature is over 20 ℃ ~ 30 ℃ than the maximum value setted,the power supply of the heater will stop, the "OVERHEAT" overt-emperature warning light will automatically turn on but the fan is still in operation, if the equipment runs without operator around,the operator should check the over-temperature protector in advance to ensure wether it has been setted properly before start [wet ball over-temperature protector set to 120 ℃].
QYSMT has specialized in SMT field over 12 years. We support one-stop SMT solution for our customers, including equipment and spare parts. Such as Reflow oven, Loader and Unloader, feeder, nozzles ect. Email : allen@qy-smt.com Skype/wechat :
QYSMT has specialized in SMT field over 12 years. We support one-stop SMT solution for our customers, including equipment and spare parts. Such as Reflow oven, Loader and Unloader, feeder, nozzles ect. Email : allen@qy-smt.com Skype/wechat :
Events Calendar | Tue Jul 11 00:00:00 EDT 2023 - Tue Jul 11 00:00:00 EDT 2023 | Oshkosh, Wisconsin USA
Wisconsin Chapter In-Person Event: PCB Workshop and PCB Plant Tour
Events Calendar | Wed Sep 11 00:00:00 EDT 2024 - Wed Sep 11 00:00:00 EDT 2024 | Oshkosh, Wisconsin USA
Wisconsin Chapter In-Person Event: PCB Workshop and PCB Plant Tour
Career Center | Brooklyn, New York USA | Production
Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Ci
visit SMTnet, over 87% came from Search engine
| https://www.smtfactory.com/I-C-T-One-Stop-SMT-Solution-for-Communications-Equipment-Manufacturing-id61663127.html
I.C.T | One-Stop SMT Solution for Communications Equipment Manufacturing - I.C.T SMT Machine English Bahasa indonesia Сербия Česky Dansk Deutsch Español
Qinyi Electronics Co.,Ltd | https://www.qy-smt.com/shop/category/siemens-others-smt-parts-1191/page/35?order=name+desc
¥ 0.00 0.0 CNY Hs-60 change over table ¥ 0.00 0.0 CNY Hs-50 change over table ¥ 0.00 0.0 CNY Hose, Vacuum Stop Circuit (Head) ¥ 0.00 0.0 CNY Hose, Vacuum Placement Circuit
winsouce.jpg)
.gif)
