Electronics Forum | Thu Jul 09 21:04:50 EDT 1998 | Dave F
| Hi there, | I am looking for some informations concerning the shear or pull strength of a typical TQFP 20 mils leads in relationship with the Copper/Tin intermetalic layer thickness. Could anyone help? | | Thank in advandce. | rgs, | chiakl Chiakl
Electronics Forum | Tue Oct 26 08:41:56 EDT 2004 | Bob R.
When we first got into BGAs on ENIG we were getting joint cracking at in-circuit test. The joints were breaking in the Sn-Ni intermetallic. We did a lot of pull testing while working with our board suppliers and our conclusion was that pull testing
Electronics Forum | Tue Oct 10 13:32:26 EDT 2006 | rsteele
Does anyone know of any tests or testing done on the peel strength of components to pads. I have alot of info on FAB level peel strength testing, but nothing on components themselves. Is there any process(es) to test and insure new pastes and reflo
Electronics Forum | Tue May 23 20:39:37 EDT 2000 | Dave F
Scott: Sounds like fun: � Solder joint strength in pull/shear varies with lead geometry, solder volume, lead metal/metallization, and the test method. � Among things, IPC-TM-650 talks to getting pads off-of boards. For instance: Method 2.4.8 is for
Electronics Forum | Mon Nov 26 13:40:40 EST 2018 | robl
Hi Prem, Yes, the flux in the Cobar paste helped with wetting and joint strength, as does reducing voids as there is more solder in the joint, as does cooling rate. Regarding peel test in KG, it depends on the pad size and volume of solder in the j
Electronics Forum | Wed Nov 20 21:04:15 EST 2002 | yngwie
Hi Dave, What do you mean by "if the board is manufactured properly". If the board is not manufactured properly, humidity will have an impact on the peel strength? Is that what you mean. How does the Humidity impacted the peel strength ? Thru' which
Electronics Forum | Wed Oct 11 09:53:06 EDT 2006 | Rob
Yes, kind of - I had a look through my notes from a while back where we did a lot of work on bending strenght but the only original source I could find was reference to a paper drawn up in 1979 "Increase Terminal to Pad-Peel Strength with a Standard
Electronics Forum | Wed Mar 29 09:31:28 EST 2000 | Erick
Marc: My experience found reliability IS a function of operator skill and attension to the process. Expecially for some RF assemblies. I worked with an engineer from Rogers to develope a process for reworking Pads for a special material. (I thing
Electronics Forum | Thu Oct 12 16:55:19 EDT 2006 | realchunks
This type of testing is only done to verify your reflow process. It is destructive testing and should not be performed on product reaching your customer. Solder is only used to provide the electrical connection from part to board. As a metal it is
Electronics Forum | Fri Nov 22 08:57:56 EST 2002 | davef
Q1: What do you mean by "if the board is manufactured properly"? A2: If the epoxy is noy cured prooperly, for instance, the copper will not be well attached to the glass. So, peel strength will be lower. Q2: I don't believe that the peel off/or lif
