http://www.gpd-global.com Conformal coating (SimpleCoat) demonstration of the Spray Valve and Volumetric Pump in action on the SimpleCoat system. The Spray Valve sprays HumiSeal 1B31 from a height of approximately 20 mm above the board. The Volumetr
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity principle. PCD technolog
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity principle. PCD technolog
Industry News | 2018-10-08 20:18:03.0
GPD Global will exhibit at the upcoming SMTA International 2018. At booth# 517, see our automated Conformal Coating Machine with excellent repeatability for under $40,000.
Industry News | 2021-09-02 06:10:22.0
MIRTEC announces the release of their comprehensive AI based Smart Factory Automation solution 'INTELLI-PRO'. This Technologically Advanced Software and Algorithm Package is specifically designed for the purpose of improving the performance and convenience of MIRTEC's complete line of AOI machines. INTELLI-PRO consists of a proprietary Deep Learning based Automatic Part Search and Teaching function, and AI based; Automatic Parameter Optimization, Character Recognition (OCR), Foreign Object Detection (FOD), Placement Inspection Algorithms and an Automatic Defect Type Classification function.
Technical Library | 2020-12-02 20:36:54.0
Industry 4.0 is a topic of much discussion within the electronics manufacturing industry. Manufacturers and vendors are trying to come to terms with what that means. In the most simplistic of terms, Industry 4.0 is a trend toward automation and data exchange within the manufacturing process. This basically requires connectivity and communication from machine to machine within the manufacturing line. The challenge is to collect data from each of the systems within the line and make that data available to the rest of the machines. Without test and inspection, there is no Industry 4.0. The whole purpose of test and inspection is to collect actionable data that may be used to reduce defects and maximize efficiency within the manufacturing line. The goal is to minimize scrap and get a really good handle on those process parameters that need to be put in place to manufacture products the right way the first time. For maximum efficiency, three inspection systems are required within the production line. These are solder paste inspection (SPI) post-solder deposition, automated optical inspection (AOI) post-placement, and AOI post-reflow. This requires a substantial investment; however, the combination of all three inspection machines is really the only true way to provide feedback for each stage of the manufacturing process.
Industry News | 2003-06-18 07:56:46.0
The IPC-9850 test materials kit includes all the materials needed for manufacturers to test flexible placement machines and chip shooters to the specifications of the IPC-9850 standard.
Industry News | 2003-02-13 08:11:45.0
eSight Can Reduce Time-to-manufacture and Time-to-market by as Much as 80%
Industry News | 2020-02-25 12:51:11.0
MIRTEC will exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The Dallas Expo is scheduled to take place Tuesday, March 24, 2020 at the Plano Event Center in Plano, TX, and the Houston Expo will be held Thursday, March 26, 2020 at The Stafford Centre in Stafford, TX.
Industry News | 2023-09-11 16:48:35.0
MIRTEC is excited to announce its participation in the highly anticipated SMTA International Exhibition, scheduled to take place at the Minneapolis Convention Center in Minnesota from October 10-11, 2023. MIRTEC will proudly showcase its groundbreaking MV-6 OMNI 3D AOI Series featuring the exclusive OMNI-VISION® 3D Inspection Technology in booth #1201.
