Industry Directory | Manufacturer
Manufacturer of automated defluxing/cleaning equipment, cleanliness testing equipment, and stencil cleaning equipment.
New Equipment | Solder Paste Stencils
Simplify and Speed Up QFN and LGA device rework. StencilMate™ leadless device rework stencils make the process of reworking leadless devices such as QFNs and LGAs simple and fast. These adhesive-backed poyimide stencils are placed on to the bottom o
New Equipment | Solder Paste Stencils
Eliminate hours of solder mask damage repair time for bga sites while improving rework yield. Are you frustrated by the time it takes to repair mask damage underneath the BGA during the rework process? Are you squeezed for space on the PCB in an
Electronics Forum | Tue Jul 02 14:24:30 EDT 2002 | paul_bmc
My question is refering to "stencil life". How accurate is this and is this something I can go by. The solder paste I am using is Kester R562, R562 specifications state that it has a 12 hour stencil life, optimal temp ranges 70-77 F, 35-65% RH. Ou
Electronics Forum | Tue Jul 02 15:50:28 EDT 2002 | blnorman
FIrst, be a doubting Thomas and never trust supplier propaganda sheets, do your own testing. How often do you knead the paste? We have a standing requirement that if the paste printer is idle for 30 minutes, we have a minimum of 4 kneads before pri
Used SMT Equipment | Screen Printers
MPM UP1500 Solder Paste Printer Left to Right / Right to Left PCB Flow Auto width rail adjust Standard 29 x 29 Stencil Frame Size Windows O/S Under Stencil Wipe Automatic Pin Placement Complete with PC, Keyboard, Mouse Comes with Squeegee Bla
Used SMT Equipment | Screen Printers
echnical Details/ Specificatiotns - SQ Left to Right printing - Compatible with the 1240mm Lamp PCB - 2.0 Cpk @ ±25㎛ - Stencil Align & PCB Up/Down - One Click, All-Axis Auto Align - Paste Fall Improvement - 0402, Mega (
Industry News | 2003-04-30 08:51:08.0
Electrolube played the role of environmental champion in Australia recently.
Industry News | 2012-01-13 13:27:59.0
The SMT stencil market has a slew of new options in foil materials, coatings and cutting technologies, all of which promise to improve the solder paste printing process. Which of these options really do help assemblers keep yields up and costs down, and which don’t?
Parts & Supplies | Screen Printers
Used in Speedline Technologies MPM Solder Paste Screen Printers. Slides into the existing 29x29 stencil frame clamp area and splices into the existing pneumatic's for the frame clamps. Accommodates 29x29 stencil frames and with 4 adjusting screws the
Technical Library | 2021-11-17 18:53:50.0
The demand for product miniaturization, especially in the handheld device area, continues to challenge the board assembly industry. The desire to incorporate more functionality while making the product smaller continues to push board design to its limit. It is not uncommon to find boards with castle-like components right next to miniature components. This type of board poses a special challenge to the board assemblers as it requires a wide range of paste volume to satisfy both small and large components. One way to address the printing challenge is to use creative stencil design to meet the solder paste requirement for both large and small components. ... The most important attribute of a stencil is its release characteristic. In other words, how well the paste releases from the aperture. The paste release, in turn, depends on the surface characteristics of the aperture wall and stencil foil. The recent introduction of new technology, nano-coating for both stencil and squeegee blades, has drawn the attention of many researchers. As the name implies, nano-coated stencils and blades are made by a conventional method such as laser-cut or electroformed then coated with nano-functional material to alter the surface characteristics. This study will evaluate nano-coated stencils for passive component printing, including 01005.
Technical Library | 2020-10-27 02:02:17.0
Solder powder size is a popular topic in the electronics industry due to the continuing trend of miniaturization of electronics. The question commonly asked is "when should we switch from Type 3 to a smaller solder powder?" Solder powder size is usually chosen based on the printing requirements for the solder paste. It is common practice to use IPC Type 4 or 5 solder powders for stencil designs that include area ratios below the recommended IPC limit of 0.66. The effects of solder powder size on printability of solder paste have been well documented. The size of the solder powder affects the performance of the solder paste in other ways. Shelf life, stencil life, reflow performance, voiding behavior, and reactivity / stability are all affected by solder powder size. Testing was conducted to measure each of these solder paste performance attributes for IPC Type 3, Type 4, Type 5 and Type 6 SAC305 solder powders in both water soluble and no clean solder pastes. The performance data for each size of solder powder in each solder paste flux was quantified and summarized. Guidance for choosing the optimal size of solder powder is given based on the results of this study.
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
Hot Sale LED SMT Stencil Printer Machine ❙ Introduce of SMT Printer ETA solder paste printer a high precision automatic solder paste printer, correspond to industrial 4.0 and MES system.through a higher level of automation,
| https://www.smtfactory.com/China-Automatic-Solder-paste-printer-Factory-Supplier-pd42676824.html
Solder Stencil Printer,solder paste stencil Machine,solder printing Machine,solder screen printing,PCB Printer Machine Price,Pcb Stencil Printer,Smt Stencil Printer Machine,Smt Printing Machine
| https://www.eptac.com/soldertips/whats-with-the-expiration-dates-on-solder-paste-or-wire/
What’s with the expiration dates on solder paste or wire? | EPTAC Skip to content Scroll Toll Free: 800.643.7822 Toggle navigation Training All Classes
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411