Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Industry News | 2003-03-26 08:25:40.0
The QVE00033 transmissive switch's small size, surface mount package and performance make it ideal for noncontact switching applications in disk drives, card detectors, mise and trackballs.
Industry News | 2003-02-24 09:32:24.0
Now available with an easy-to-use dispensing gun, Electrolube TCR is a single-component, highly thermally conductive RTV sealant.
Industry News | 2003-04-23 08:21:34.0
Rohm has a new series of ultrasmall high-brightness side-emitting chip LEDs that use built in reflectors and lenses to deliver optimum luminous intensity from minimal PCB footprint and power drain.
Industry News | 2020-03-05 17:49:27.0
-14 colors comply with automotive industry requirements and UL standards -Globally available in small quantities as production ramps up -Connectors needed in next-generation automobiles
Parts & Supplies | Assembly Accessories
Detailed Product Description Features: 7 Channel Brand: KIC Part Name: X5 Reflow Profiler Model: X5 Condition: Original New Leadtime: 7days KIC X5 Thermal Profiler with SPC software and RF capability For Reflow Track More Data Points With 7,
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board
Industry News | 2022-11-11 07:33:41.0
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board pads.
Industry News | 2008-10-26 00:28:46.0
ROSEMONT, IL � Industry-leading associations IPC and SMTA jointly announce that Dave Adams (Session Chair) of Rockwell Collins, Lee Flasche of Delphi Electronics Group, Dr. Ning-Chen Lee of Indium Corporation, Steve Hugh of Philips Medical, and Dr. Ken Dishart formerly of DuPont will present in Session 4 on Lead-Free Cleaning. The symposium, jointly sponsored by IPC and SMTA, will be held at Crowne Plaza Chicago O'Hare in Rosemont, IL on October 28-29, 2008
Used SMT Equipment | Soldering - Reflow
REHM VXS Nitro 4550 (Type 945) Oven Serial Nr.: 3439 Year of Manufacture: 2013 Direction: Left to Right Transfer height: 900mm (+/- 75mm) Process Chamber Heating: Length: 4550mm Qty of preheating zones: 9 Length of preheating zone: 3150mm Qty of pea