Electronics Forum | Thu Sep 13 20:34:02 EDT 2018 | davef
What does your supplier say? How will they make you whole?
Electronics Forum | Thu Sep 13 13:04:52 EDT 2018 | jrs192
Hello! Recently started buying PCBs with peelable mask to remove the need for Kapton tape. Had no issues with our first batch, but our supplier has over-cured the second batch - it comes off in tiny bits, and is stuck in the holes. After timing the
Electronics Forum | Mon Sep 24 11:28:55 EDT 2018 | etmpalletguy
Use a solder pallet, the pallet will mask off the locations required, thus eliminating the need for any kind of masking!! You've eliminated the need to apply, but you still have to peel off, not much of time saver. Pallets can be used for batch or s
Electronics Forum | Fri Sep 14 07:46:34 EDT 2018 | charliedci
If it is "wondermask" made by Techspray, it is supposed to be water soluble. It being overcured (we have experienced this before), water will not touch it. We used acetone which softened it up to remove it with an orange stick. We apply it ourselves
Electronics Forum | Wed Oct 20 20:38:30 EDT 1999 | Dreamsniper
I am looking for sources of temporary peelable solder mask to mask/cover holes on a circuit bd that need not be soldered during wave soldering�..must have distributors in Australia. I�ve contacted some down here but they do not have products package
Electronics Forum | Mon Jul 24 15:50:51 EDT 2023 | proceng1
I am going to be using a pressurized dispenser for Chemtronics CM1 peelable mask. I need to find a solvent that will work for flushing the system. I tried Xylene that we have here and it does ok, but not as good as I'd hoped. It works very well fo
Electronics Forum | Fri Oct 22 10:35:56 EDT 1999 | Graham Naisbitt
Armin, I can supply you but wont. Why not? Because these materials have a short shelf life when packed into syringes. Your local supplier should be able to provide them but he will be obliged to make up a batch of 2 - 300 to be economical - but they
Electronics Forum | Wed Oct 13 12:07:43 EDT 1999 | mikeh
Hi, I am currently using a peelable mask prior to wave soldering and have started exploring water soluble/washable masks. The mask will be used with water based and alcohol based flux. Are there any compatability issues to concider and how will this
Electronics Forum | Mon Sep 27 08:52:11 EDT 1999 | Brian
| i had a problem here, during the wave soldering process, we apply a water soluble mask on the gold finger to protect it from contamination. But after washing, there is still some mask left on the gold finger. | Can anyone pls advise is there any pa
Electronics Forum | Mon May 22 17:14:16 EDT 2000 | Justin Medernach
Hi All, I'm looking for companies who sell in-line solder mask applicators capable of dispensing peelable as well as water soluble mask formulations. Could anyone provide me with some names, please. If this is the wrong forum for this question, I d
.png)
