Electronics Forum | Fri Mar 25 15:14:09 EDT 2011 | ghenning
Create an ODBC connection to the Firebird DB. Then query the RESULT_HEADER table with something like: SELECT RESULT_HEADER.MACHINE_NAME, RESULT_HEADER.MODEL_NAME FROM RESULT_HEADER GROUP BY RESULT_HEADER.MACHINE_NAME, RESULT_HEADER.MODEL_NAME ORDER
Electronics Forum | Wed Nov 16 12:01:59 EST 2011 | benreben
Hi, for me the best system AOI is SAKI because is not a head with a FOV but is a scaner. this scaner take the image board in a few seconds. This machine have many algorithm for inspect all errors on a board. But the interface is difficult and the pr
Electronics Forum | Fri Jun 17 17:11:59 EDT 2005 | stansmt
I have been working with the Yestech system in my facility after evaluating the Mirtec. The yestech system has far less false calls and better defect coverage based on the test vehicles I ran. The YTV-1000 out performed the Mirtec in defect detection
Electronics Forum | Tue Mar 20 16:23:20 EDT 2012 | hegemon
Based on my experience with OMRON VT-RNS, I would not consider this machine unless you are running high volumes of a limited number of assemblies. Programming and debug took a lot more time than than other machines in the same price range. After deb
Electronics Forum | Mon Dec 27 07:12:54 EST 2010 | clampron
Good Morning Methos 1979, I have worked with the Mirtec MV2 and 3 for several years. I did perform some evaluation of the red/blue filters. We found it to be usefull for some specialty solder inspections but we found it most usefull for solder inspe
Electronics Forum | Fri May 27 09:14:30 EDT 2005 | stepheniii
I found the Mirtec got faster and faster to program the longer we had it. Both from a learning curve point of view and a building the library point of view. And it was reasonably fast to program at the start anyways.
Electronics Forum | Fri Dec 01 16:51:14 EST 2006 | tony_d
Hello Lou, I agree with John S. There is no substitute for first hand experience. I recently evaluated these machines among others for my company. I selected Mirtec based on ease of programming, inspection performance and Gage R&R testing. We
Electronics Forum | Wed Oct 31 12:06:08 EDT 2007 | devgru
We have the yestech systems and are very pleased with them. I would also suggest that you bring units into your facility to see a demonstration. It seems that there are really only two choices when it comes to the quick to program and easy to use ver
Electronics Forum | Fri Feb 04 16:24:00 EST 2011 | snigro
Rodrigo I am the service manager of Mirtec. When your using ATT It tries to match the saved image to what is on the board. If the area isnt a good match, it will not program the part. At the bottom of the ATT window, select the tab labeled 'mmd file
Electronics Forum | Wed Jan 19 12:54:17 EST 2011 | bdamico
Hello Mark, The centroid data you are currently using to program the MV-2HTL may be used with either platform. However, the libraries cannot be shared due differences in camera resolution. The MV-2HTL will have a 1.3 megapixel camera versus the 2 m
