Electronics Forum | Tue May 26 23:42:20 EDT 2020 | smiran082
Hello, I am having trouble the QSV-1 PNP machine. On boot it had trouble connecting to the RT computer as it was hung on a message saying something along the lines of, "Establishing connection to RT computer". After several restarts we still could
Electronics Forum | Tue Oct 09 09:05:24 EDT 2001 | fszypula
Good morning. Tyco who now carries the Quad line of products offers the QSV-1 an inline machine that can do a 18" wide by 20" long PCB. With modifications the machine can do up to a 30" x 48" PCB with upward looking inspection without upward inspec
Electronics Forum | Sun Feb 09 19:16:22 EST 2014 | navworx
Was running production when the head just came to a stop, motor went off, error window said to home. Upon attempting to home, got message: G1T2 homing error; index mark not found. I've tried rebooting the machine, but this error still appears. Any
Electronics Forum | Wed Nov 17 12:12:30 EST 1999 | Wendy Casker
Well, I was using a quad QSV-1 for boards this size. Not the fastest, but it was able to handle the large boards in a pass through machine. Keep in mind the board thickness, as well. Anything over 0.2" will not fit in the clamps of the conveyors.
Electronics Forum | Wed Nov 25 05:40:46 EST 1998 | Jim Mitchell
Gang - Thanks for your recent kind comments recently on the QSV-1 machine. As you know, QSoft can import a variety of Windows formats including tab and space delimitted files. It may be that this Cadence software does not export ASCII data. In any
Electronics Forum | Wed Jan 23 13:02:35 EST 2008 | tbkonrad
Thanks for the info. I called Mike Tieman earlier and he recommended I do the exact same things. He said that there should be very little resistance on the theta of the Z-rods, (not the case) so he recommended that the P4 head be replaced. Mike is
Electronics Forum | Wed Jan 23 14:26:52 EST 2008 | operator
I have seen the bad alignment error many times and never had to replace the head for it. It usually has something to do with the laser windows being dirty or cracked. Also it could be your profile settings. Make sure all of these things are perfect b
Electronics Forum | Mon Mar 10 16:33:37 EDT 2008 | alsnet
Hello Everybody, I'm looking for the AutoProgram Software for Quad IIc machine, Do you know someone who can share me a copy of this?, I can share a copy of the technical manuals of this machine. If you're interested, please let me know. Thanks
Electronics Forum | Wed Apr 17 05:21:50 EDT 2013 | navbill
Hi, We have QSV-1 machines with stock Quad IQ feeders (8 pins). Some of these feeders will produce a "feeder does not exist" error on both the pick and place machine as well as the OLS station. Is this a problem that can be fixed by us or do the f
Electronics Forum | Wed Apr 08 15:09:17 EDT 2015 | bobpan
Your UPS did not shut down properly....reset it by going in through the bottom right side cover (exit end of the machine) and press the reset button on the ups. The machine should then work properly. Next is why the fiducial froze up. If you mistyped