Full Site - : quad 2c (Page 5 of 5)

Quad IIC - Can you use a Quad Align Board from S Series?

Electronics Forum | Tue May 31 15:29:09 EDT 2011 | leemeyer

I have a QSP-2 which I assume is in the same family as the QSA-30. I compared the diagram that is in the service manual with a board from a 2-C and they appear to be the same. Your best bet would be to contact PPM at http://www.goppm.com. They shoul

Quad IIC - Can you use a Quad Align Board from S Series?

Electronics Forum | Wed Jun 01 10:02:56 EDT 2011 | bobpan

Those cards are all different. The c-series stands alone by itself while a qsp2 and qsa-30 mount into a slot. They were all manufactured seperately for each machine. I would purchase a new refurbished one for the 2c machine and forget about the other

Quad 1000, looking for opinion

Electronics Forum | Tue Nov 01 08:33:40 EST 2005 | bobpan

Dave, Dont mind Ken.....in the past he just hired the wrong ex-quad guy previously that couldnt get his machines working right......anyways.....if you want to keep the same feeders you would need a 2c or 4c....the centering should be a quad-align but

Researching placement machines - where do I start?!

Electronics Forum | Mon Nov 09 15:58:09 EST 2009 | cellis

The biggest thing you will not get is the vision system like this. The 7722 has flying vision for most components and an upward looking vision camera for large components and BGA's. The older Quads had the Quad Align system which is laser vision.

Re: Quad IIc, Autoprogram

Electronics Forum | Tue Jul 25 12:14:12 EDT 2000 | Wolfgang Busko

Hi Vicky, seems to be always the same dilemma with CAD people. My experience is that they can provide data in all possible formats, sometimes using scripts they write to create whatever output is needed. It needs a little diplomacy and the exact for

Quad 4C part placement rejection

Electronics Forum | Thu Nov 17 17:44:19 EST 2011 | bobpan

Tim, 1. You dont need the vacuum verify if the quadalign is working properly. If you have the part quad-aligned and dont have alignment type at 0 it will never 'not' place a part. More or less...the vac verify was needed for the chucking machine (3c)

Quad IVc AutoProgram

Electronics Forum | Mon Apr 08 19:06:52 EDT 2013 | microaide

So my board is called 850152, and is in a folder called BRD297XX.DIR. AutoProgram generates the pick and place program (for two heads) without error. When it does, two more "boards" appear. 850152A B1 in folder BRD2C7XX.DIR, and 850152A B2 in folder

Sm t t t t t net
Previous 1 2 3 4 5  

quad 2c searches for Companies, Equipment, Machines, Suppliers & Information