Electronics Forum | Mon Oct 31 13:04:15 EST 2005 | bobpan
Dave, The quad 1000 was a samsung machine with quads name on it......the software sucks and it is totally different from central controller. If you go for a machine....go for a 2c r 4c if you still want to use the same feeders. Chip shooter means 080
Electronics Forum | Tue Nov 01 13:44:37 EST 2005 | erokc
I was reffered to PPM by a dealer on the east coast. There web site is well constructed and looks like they are organized. When I can get enough knowledge to carry on a conversation I'll call Tom. What is the difference in the 2c and 4c? From wha
Electronics Forum | Tue May 31 15:29:09 EDT 2011 | leemeyer
I have a QSP-2 which I assume is in the same family as the QSA-30. I compared the diagram that is in the service manual with a board from a 2-C and they appear to be the same. Your best bet would be to contact PPM at http://www.goppm.com. They shoul
Electronics Forum | Wed Jun 01 10:02:56 EDT 2011 | bobpan
Those cards are all different. The c-series stands alone by itself while a qsp2 and qsa-30 mount into a slot. They were all manufactured seperately for each machine. I would purchase a new refurbished one for the 2c machine and forget about the other
Electronics Forum | Fri Nov 18 14:04:46 EST 2011 | bobpan
Seems to be quad c-series week......anyways.... 1. What version ap and central controller? 2. What version of windows? 3. What size are your vision models? 4. What options are selected in teach fiducials......globabl fiducial correction,multi fiduci
Electronics Forum | Wed Nov 18 14:09:28 EST 2009 | cyber_wolf
Please let us know how a 10-15K Quad 2C works out for you if that's what you decide on.
Electronics Forum | Thu Mar 24 09:33:45 EDT 2011 | bobpan
An old quad 2C/4C with a workholder will probably fit all those numbers. 2Ft is pretty long though and that might be a little too long. Machine price range is about right. Programming is pretty easy. Good luck
Electronics Forum | Mon Nov 07 14:15:02 EST 2011 | bobpan
There are different sets of mod codes depending on the firmware version on the machine. One of the function codes can tell you what firmware you have and if its quadalign or cyberoptics. Re-post and maybe i will have the version you need.
Electronics Forum | Tue Nov 22 05:44:05 EST 2011 | bobpan
I thought the the machine was slowed down to speed setting 1 for the x/y axis and the machine worked. I think the x-motor was on its way out.
Electronics Forum | Tue Nov 08 07:23:03 EST 2011 | leemeyer
Thanks Bobpan, A function 6 tells me that I have firmware ver IVC 3.05. I keep getting a motor error 4 "The Xand/or Y axis did not reach the commanded position within 500 msec." The battery was dead on this machine so the mod codes were lost. I en