Electronics Forum | Fri Feb 01 08:58:28 EST 2019 | bobpan
2 is a little slower than 0. leave me your email address and i will send you the procedure.
Electronics Forum | Fri Feb 01 09:02:06 EST 2019 | dfl
dfl1973gamer@gmail.com yes, "2" it's working good, thanks for the tip
Electronics Forum | Fri Feb 01 18:23:30 EST 2019 | slthomas
Is it indexing at the correct pitch when you push the forward button? I really can't remember much about those machines but it seems like that's an indication that it's not programmed correctly. I'll be bobpan knows, regardless. ;)
Electronics Forum | Sun Feb 03 07:41:29 EST 2019 | dfl
Anyway, after both procedures, the feeder still advancing more than 4mm (like 12mm or so)
Electronics Forum | Thu Jul 09 15:07:31 EDT 2020 | jmelson
Yes, the Quad IV C machines look like they have been picked for parts. Obviously, same for the CP45FV. The QSA30 machines LOOK to be in better shape, but I could be wrong. Jon
Electronics Forum | Fri Nov 20 23:22:52 EST 2015 | rx8pilot
Hello, I am trying to figure out if it is possible to program the index distance on Quad Tyco Feeders. I recently got a Quad IV-C and on the 16mm feeders, they index 12mm where I have an 8mm pitch tape. It is a non-IQ machine so I am looking an man
Electronics Forum | Mon May 16 19:57:51 EDT 2016 | rx8pilot
I recently purchased some used ThinPRO precision feeders for my Quad IV-C (PPM 4000C). They are in great shape, but I do not know how to program them to index at 2mm Does anyone have experience with these that know how to program them? I can only go
Electronics Forum | Fri Jun 26 22:13:42 EDT 2020 | jmelson
Can anybody who has a PPM-retrofitted Quad IV C tell me what they think? I'm still going around in circles trying to decide what to get. I am doing some TSSOP and QFP parts with 0.5 mm lead pitch and 0.65mm, and my current machine isn't accurate en
Electronics Forum | Thu Mar 03 13:48:06 EST 2011 | bobpan
Your vacuum verify is not working correctly. I think if you hit shift and switch verify....it will turn it off. You will not longer have a V just enter command on the hht. If this works ....try adjusting your mod code 9 to a better setting. Then you
Electronics Forum | Tue Oct 09 10:29:47 EDT 2018 | dfl
Thanks Bob. Using a flashlight helps a lot, indeed. Is "re-adjust the angle" just a bend on the LEDs heads (by hand)? I will try. To replace de LEDs, can I use white ones? I believe with the reds I get less light than whites, but maybe the camera ne
.jpg)
