Electronics Forum | Tue Apr 02 13:08:40 EDT 2013 | babe7362000
It has been years since I used autoprogram. But I believe your low reference number is your low slot number on the base and then the ref. is what slot you will teach your feeder ref. to the far left. And the High slot number is the higest slot numb
Electronics Forum | Tue May 10 09:45:53 EDT 2011 | veeckm
After changing mod codes 50,51 and 54,55 respectively on the HHT I will then goto ccconfig.sys file in the central controller software and manually enter in the new mod code values. I do not do any uploading/downloading of mod codes through database
Electronics Forum | Mon Jul 09 18:29:19 EDT 2012 | btipcb
I have gotten to what I hope is the last step before I can start running product. However, I have and keep receiving an "Invalid Place Position X" error in three steps of the placement program. I have verified that the camera can indeed find these
Electronics Forum | Wed Sep 26 15:04:09 EDT 2012 | kahrpr
The QSA30 is basically a Samsung CP40 with a few changes. For an older machine the programming is pretty good. it can do array boards and has an import feature for XY data. Tts been about 7 years since I ran one. Its a pretty solid machine.
Electronics Forum | Tue Jul 25 16:23:33 EDT 2000 | Paul Wright
Vicki, Ask your CAD guys to give you the centroid X-Y data with reference designators in ASCII format. Then import that file into Excel. You can then change the fields and data into the format you need. Make sure you left justify the columns. Af
Electronics Forum | Mon Apr 08 19:06:52 EDT 2013 | microaide
So my board is called 850152, and is in a folder called BRD297XX.DIR. AutoProgram generates the pick and place program (for two heads) without error. When it does, two more "boards" appear. 850152A B1 in folder BRD2C7XX.DIR, and 850152A B2 in folder
Electronics Forum | Tue Apr 09 08:56:18 EDT 2013 | leemeyer
I made a new program today that will run on 2 machines and my AP did not create the 2 additional boards that you are speaking of. I'm not sure what thats all about. This is my method: 1. Set up a Assembler/system in AP that includes both machines tha
Electronics Forum | Mon Apr 08 13:09:48 EDT 2013 | microaide
I have set Maximum Sequence Steps Per Program Segment to 450 and Maximum Placements Per Program Segment to 200. I have two Quad IVc machines, with a separate central controller in each one. One machine has a waffle feeder and will have vibratory feed
Electronics Forum | Mon Apr 29 09:58:38 EDT 2002 | pjc
Machine Data Mydata MY9 machine weight: 1800kg placement repeatablilty @ 3 sig: 15 micron x-y axis drive mech: x combo belt rackπnion, y ball screw Siemens F5 machine weight: 1500kg placement accuracy @ 3 sig: 30 micron x-y axis drive mech: x belt
