www.unisoft-cim.com/prontoaoi.htm - ProntoAOI software from Unisoft is used by electronic manufacturers to quickly program their Automatic Optical Inspection (AOI) machines and X-RAY Equipment. ProntoAOI programs most popular AOI Equipment such as
ProntoPLACE used by electronics manufacturers will quickly program your surface mount SMT and thru-hole assembly equipment. In minutes Unisoft ProntoPLACE software translates CAD or Gerber and Bill of Materials (BOM) files into real reference desig
ScanPLACE provides a sophisticated and user-friendly alternative to complex CAM software packages and inaccurate, time consuming manual inspection and programming methods that cost assembly houses productivity, time and money. Programming Using a
The new system delivers high-speed (5,700mm2/sec), high-accuracy (XY positioning of 3µm at 3?), height repeatability (below 2µm at 3?), and scalable resolutions of 7, 12 and 18µm for boards weighing 12kg. http://www.sakiglobal.com/automated-optical-i
Electronics Forum | Fri Apr 12 19:20:25 EDT 2013 | microaide
Some progress, now stuck again. I can now generate a pick and place program for two heads that actually runs the head 1 program when loaded into the central controller of machine #1. But all attempts at getting machine #2 to run the head 2 program ha
Electronics Forum | Wed Apr 10 15:05:23 EDT 2013 | microaide
I followed your instructions and did NOT select the option to break up the program for separate central controllers. I now have a program I can copy to central controller #1, and I can delete the head 2 data from the program. Now when I select RUN TH
Electronics Forum | Fri Apr 05 20:00:08 EDT 2013 | microaide
I cheated on the escapement length for the SOLIC plate and got through Feeder Optimization and Generate Program without any errors. Some progress, but no I cant figure out how to the the generated program into the central controllers on the Quad IVc
Electronics Forum | Mon Apr 08 13:53:46 EDT 2013 | leemeyer
I copied a program to a floppy and compared that to the files that were in my AP board directory and they are identical. In your board list directory (on your AP machine) look at picks.asc and places.asc and see if there is any good looking data the
Electronics Forum | Tue Apr 02 13:08:40 EDT 2013 | babe7362000
It has been years since I used autoprogram. But I believe your low reference number is your low slot number on the base and then the ref. is what slot you will teach your feeder ref. to the far left. And the High slot number is the higest slot numb
Electronics Forum | Tue May 10 09:45:53 EDT 2011 | veeckm
After changing mod codes 50,51 and 54,55 respectively on the HHT I will then goto ccconfig.sys file in the central controller software and manually enter in the new mod code values. I do not do any uploading/downloading of mod codes through database
.gif)
