Electronics Forum | Thu Mar 02 04:50:25 EST 2006 | bobpan
oh....for the feeders moving 2 parts....you must teach a pickup repeat. Make an extent in the pickup editor and attach it to repeat with pick and make it a 2x1 with an 80 mil offset. The machine will then pick the part that is out of the sensor first
Electronics Forum | Mon Jul 06 11:17:56 EDT 2009 | slthomas
xcopy is probably the cheapest way, although it's a manual operation. We just used a batch (.bat) file called "backup" that ran xcopy on our pcb file directories and dumped the copies to a second hard drive on the same pc. If you can't install seco
Electronics Forum | Mon Apr 11 15:57:25 EDT 2011 | bobpan
If the feeders that you are having problems with have tall parts in them.....and these are the ones the machine is stopping on.....check to see that you are not scanning higher than what your function 30 nozzle height is. In other words...if your fun
Electronics Forum | Tue May 10 07:57:49 EDT 2011 | mosborne1
Are you uploading the mod codes to your central controller when you change them? If not when you run your produciton the central controller will download the mod codes that are stored in the CC. You might also have an encoder problem. When the machin
Electronics Forum | Mon May 16 06:02:14 EDT 2011 | bobpan
Multiple times i have seen where the downward camera lens inside of the camera becomes detached inside. It is just glued down. To see if this is the problem. Park the head over a spot and tap on the camera every direction. The crosshairs should NOT m
Electronics Forum | Fri May 06 10:18:43 EDT 2011 | bobpan
Hello Doug, There is no tuning up of the cyber-unit. From the symptoms you describe......sounds like the white cable that plugs into the cyber is intermittent. Maybe you can find one somewhere and try that. The cyber unit is a closed assy. and was ma
Electronics Forum | Mon May 16 15:50:52 EDT 2011 | jimlas53
Yes, it looks like it would involve quite a bit... I guess it partly depends on finding the hardware/firmware, possibly from a donor machine. But it might not be worth the cost. At the moment I'm running all product on the first machine with Quada
Electronics Forum | Mon May 16 22:06:22 EDT 2011 | danaherr
Downward looking camera not working. swapped cables on board and upward looking camera works when plugged into downward camera's connection on video card. Thinking maybe a cable issue??? manually moved gantry all over trying to see if intermitent ope
Electronics Forum | Sun Dec 04 10:40:23 EST 2011 | bobpan
Do you have the motor power turned on? It is next to the main power breaker (front panel of machine). Are all the covers down? Are the side covers pushed all the way in? What is the led status of your driver cards? They should be all green with no re
Electronics Forum | Tue Feb 07 05:35:56 EST 2012 | ngineer
If anyone else reads this because they blew up a feeder like mine, an appropriate capacitor for replacement is : Kemet T491D107K006AT Which you can find at mouser, or probably digi-key or newark. This is for the larger capacitors, i think they're
