Electronics Forum | Fri Feb 01 07:21:32 EST 2019 | dfl
One of my 8mm feeders is blinking the red led after the pick-up. With both buttons the motor works as expected (forward/backward), but after the nozzle pick-up the motor moves forward and then the red led blinks. pressing the buttons the green led l
Electronics Forum | Tue Mar 13 13:10:09 EST 2001 | onset
As long as you perform a repeat pickup on the part with an ordinary feeder you will be fine.
Electronics Forum | Thu Mar 15 17:34:38 EST 2001 | rentreo
I place 0302's on my Quad 4c's all the time. Use a repeat pick-up just like a waffle tray part but make sure the z height is perfect on your pick-up or you will bounce the other parts out of their pockets. Also change your mod code to only try once o
Electronics Forum | Fri Feb 01 19:12:18 EST 2013 | marcelorotofrance
Hi, I have a QUAD 4C mk2. I taught pickups and places from HHT. If I test them individually (RUN STEP PICK/PLACE etc...) before building the sequence, everything runs ok. After the sequence was built, everything goes wrong. Every PICK or PLACE ends i
Electronics Forum | Wed Jan 28 19:53:02 EST 1998 | NAZEEH CHAUDRY
We are facing some placement problems with our QUAD 4-C. Program was running fine last week, Next week program will be off (placement, pickup,vision files etc, Any help, any idea,??? Thanks
Electronics Forum | Wed Jan 28 19:52:16 EST 1998 | NAZEEH CHAUDRY
We are facing some placement problems with our QUAD 4-C. Program was running fine last week, Next week program will be off (placement, pickup,vision files etc, Any help, any idea,??? Thanks
Electronics Forum | Thu Jan 29 23:07:37 EST 1998 | Scott
| We are facing some placement problems with | our QUAD 4-C. | Program was running fine last week, Next week | program will be off (placement, pickup,vision files | etc, | Any help, any idea,??? | Thanks I had the same problem on a trio of Quads at m
Electronics Forum | Wed Feb 25 03:01:13 EST 1998 | MARK EDVINSSON
| We are facing some placement problems with | our QUAD 4-C. | Program was running fine last week, Next week | program will be off (placement, pickup,vision files | etc, | Any help, any idea,??? | Thanks To be honest with you those machine they never
Electronics Forum | Thu Mar 02 04:50:25 EST 2006 | bobpan
oh....for the feeders moving 2 parts....you must teach a pickup repeat. Make an extent in the pickup editor and attach it to repeat with pick and make it a 2x1 with an 80 mil offset. The machine will then pick the part that is out of the sensor first
Electronics Forum | Tue Mar 12 09:23:52 EDT 2013 | bobpan
If you edit the sequence on the hht.....to fix your problems...you then have to upload the data to central controller. If you are not doing this....you are overwriting the data on the machine with bad data everytime you download to the machine. The l
winsouce.jpg)
