Industry Directory | Manufacturer
An innovative thermal management company that is dedicated to address the thermal challenges that the electronics industry is facing.
Hanwha DECAN S1 Pick and Place Machine Speed: 47,000 CPH PCB Size : L510xW510 Feeder input:120pcs Weight: 1600KG Product description: Hanwha DECAN S1 Pick and Place Machine, Speed: 47,000 CPH, PCB Size : L510xW510, Feeder input:120pcs, Weight: 1600K
New Equipment | Test Equipment
Application of new and innovative design features to increase test speed, board access, reliability, and repeat-ability, have opened up new possibilities for deployment of Acculogic’s FLS900 series testers. As the first patented flying prober with do
Electronics Forum | Fri Jun 17 07:38:59 EDT 2005 | jdumont
Thanks for taking a look at the pics. I have made my thoughts on this type of design known to all. Im going to let this run through and have them put a note in the file for this board to reduce the trace size for the next time the board gets rev'd up
Electronics Forum | Thu Jun 02 10:54:12 EDT 2011 | davef
Al: We agree with AVFOM. You have a different problem than solder paste mesh selection. Most often, tombstoning occurs when the wetting forces on the two pads are unequal. Examples of things that can cause this are: * Pads are different * Board pad
Used SMT Equipment | SPI / Solder Paste Inspection
Vintage: 2008 Description: 3D Solder Paste Inspection Details: • 3D sensing system w/ built-in fiducial camera and lighting • MicroPad Sensor • Mechanical board stop • Auto-width adjust conveyor • Max PCB width: 20” x 20” • Max inspection
Used SMT Equipment | Soldering - Selective
Pillarhouse Jade MKII Selective Soldering Machine Model: Jade MKII Year: 2016 Lead-Free Drop Jet Fluxer Top Side IR Pre-Heat Auto Soler Top-Up & Solder Level Detect Inerted Nitrogen System Thermal Nozzle Calibrati
Industry News | 2003-03-21 08:12:24.0
Tecan reckons it is consistently producing what may be regarded as the most efficient stencils in the world today.
Industry News | 2015-04-23 16:30:38.0
Metcal is pleased to announce that SMTA China awarded its Applications Manager, Paul Wood, ‘The Best Presentation of Vendor Conference One’ for the presentation titled “Why Non-Contact Array Solder Clean Up is required.” The award was presented during the SMTA China East 2015 Conference Award Presentation Ceremony on April 22, 2015 at the Shanghai World Expo Exhibition & Convention Center in conjunction with the SMTA China Annual Award Ceremony.
Parts & Supplies | Pick and Place/Feeders
ASM SIEMENS mounter electric series fiducial feeder calibrator Trade name: Siemens FEEDER calibration instrument Commodity weight: about 35KG Commodity size (mm): L500*W350*H500 Calibration mode: electric dynamic Applicable models: Siemens D s
Parts & Supplies | Pick and Place/Feeders
Brand: FUJI Name: FUJI Scalble Placement Platform NXT Iii Module Width: 320mm Placing Accuracy: +/-0.038 (+/-0.050) Mm (3σ) Cpk≥1.00* Lntelligent Feeders: Support For 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, And 104 Mm Wide Tape Part Size: 04
Technical Library | 2018-03-05 11:22:48.0
Growing demands for smaller electronic assemblies has resulted in reduced sizes of passive components, requiring the introduction of newer components, such as the 01005 devices. Component miniaturization presents significant challenges to the traditional surface mount assembly process. A successful assembly solution for these 01005 devices should be repeatable and reproducible, and should include guidelines for (i) the selection of solder paste and (ii) appropriate stencil and substrate pad design, and should ensure strict process control standards.
Technical Library | 2024-07-24 01:04:35.0
Quad Flat No Leads (QFN) package designs receive more and more attention in electronic industry recently. This package offers a number of benefits including (1) small size, such as a near die size footprint, thin profile, and light weight; (2) easy PCB trace routing due to the use of perimeter I/O pads; (3) reduced lead inductance; and (4) good thermal and electrical performance due to the adoption of exposed copper die-pad technology. These features make the QFN an ideal choice for many new applications where size, weight, electrical, and thermal properties are important. However, adoption of QFN often runs into voiding issue at SMT assembly. Upon reflow, outgassing of solder paste flux at the large thermal pad has difficulty escaping and inevitably results in voiding. It is well known that the presence of voids will affect the mechanical properties of joints and deteriorate the strength, ductility, creep, and fatigue life. In addition, voids could also produce spot overheating, lessening the reliability of the joints.
To see more about the Jade MKII Single Point Selective Soldering System visit Pillarhouse USA at: https://www.pillarhouse.co.uk/products/selective-soldering-handload/jade-mkii-handload Entry-level, single point selective soldering system Designed t
Ultra-flexible, offline, multi-platform, quick load twin PCB rotary table selective soldering system Designed to meet the needs of the small batch manufacturer who requires high levels of production flexibility. The Jade Prodex offers the ability to
Events Calendar | Mon Apr 12 00:00:00 EDT 2021 - Mon Apr 12 00:00:00 EDT 2021 | ,
Europe Chapter Webinar: Tombstoning Components during Reflow Soldering - Causes & Cures
| http://etasmt.com/cc?ID=te_news_industry,26566&url=_print
Size Does Matter – Breaking the Barriers of Wafer Level Packaging-SMT Technical-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News
Imagineering, Inc. | https://www.pcbnet.com/capabilities/fabrication/hdi/
. The benefits of HDIs. Increase electrical performance : The smaller parts used on HDI boards have shorter internal wire lengths. This provides reduced rise times and lower power requirements when compared to their larger, alternative packages. Reduce PCB size
winsouce.jpg)
