Electronics Forum | Wed Jun 11 11:12:10 EDT 2003 | JB
We rarely use the tack-time on our machines, even if we run products that are populated with large components. ( ICS, Tant caps etc.) There is a default tacktime for each component on the component library, is called Speed Data. For the components
Electronics Forum | Sat Aug 07 11:10:03 EDT 1999 | JohnW
| Could someone give recommendation on the stencil opening for printing epoxy on HAL FR4 PCB for 0805 and 0603 size chips capacitors and resisitors. | My regular stencil manufacturer recommend the following: | Thickness: 8 mils | 0805 opening: Oblong
Electronics Forum | Wed Jun 11 16:30:33 EDT 2003 | T.Vick
You have received some great feedback so far. I would like to summarize and add a few points regarding maintenance. You should start (as recommended already) by verifying your component library data. Using the default values from the master library i
Electronics Forum | Wed Nov 01 14:42:17 EST 2000 | MRMAINT
We had some similar issues on one of our products.The oven profile is critical. We found that with a gradual soak ramp up it took care of about 80% of the tombstoning.The other thing that we found was pad design issues. Take a look at the sept. issu
Electronics Forum | Thu Nov 02 22:19:32 EST 2000 | Dason C
For 0402 or less, it is prefer to start on the pad design but it doesn't help right now. Senju Metal say that they have develop one of the paste can reduce the tombstoning problem but I don't have chance to test it. Please try and post your finding
Electronics Forum | Thu May 29 15:00:49 EDT 2008 | slthomas
We've found that reverse homeplate reduces tombstoning significantly for us on 0603 and 0402 (the latter of which we hardly ever see).
Electronics Forum | Wed Aug 05 20:48:50 EDT 1998 | Ron Costa
I'm currently running a double sided paste smt board loaded with 0603's, on the secondary side. Many of the 0603 devices tombstone during reflow if the parts are not perfectly centered on the pads. Is this caused by the .008 foil thickness? Has anyon
Electronics Forum | Mon Feb 18 03:40:04 EST 2008 | akareti
Hi everybody, I found a defect varistor 0603 Tombstone and poor welting when we use component that terminal is Silver palladium (Ag/ Pd) with Leaded solder paste (63/37). Then we change alternative component that terminal is Ni/ Sn the result not fou
Electronics Forum | Thu Aug 06 12:16:52 EDT 1998 | Rin
| I'm currently running a double sided paste smt board loaded with 0603's, on the secondary side. Many of the 0603 devices tombstone during reflow if the parts are not perfectly centered on the pads. Is this caused by the .008 foil thickness? Has any
Electronics Forum | Fri Aug 07 10:14:43 EDT 1998 | RWW
| I'm currently running a double sided paste smt board loaded with 0603's, on the secondary side. Many of the 0603 devices tombstone during reflow if the parts are not perfectly centered on the pads. Is this caused by the .008 foil thickness? Has any
.png)
