Electronics Forum | Mon Aug 21 15:02:53 EDT 2006 | FredC
If you really have Loctite Super Glue it is a cyanoacrylate and can be removed with acetone. If you have a Loctite aneorbic glue that has not hardened yet, acetone will remove it. If an anerobic has hardened I know of nothing that will remove it. Als
Electronics Forum | Sat Sep 02 10:10:18 EDT 2006 | cyber_wolf
HAHAHAHA ! Did you read the section about getting super glue off lips ? How could you accidentally super glue your lips together? Funny stuff man.....
Electronics Forum | Sun Sep 03 09:50:11 EDT 2006 | davef
Se�or Tech: You mean you never stayed at a friends house and woke-up the next morning to find that they shaved your eyebrows or superglued your lips? Now, that's funny. [Well, at the time it's not always funny, but the pix are later.] Don't let th
Electronics Forum | Thu Oct 26 11:41:53 EDT 2023 | proceng1
We currently use Loctite 348 chipbonder to secure large parts that will hang under the board when reflowing the second side. Rework has been complaining that they sometimes have to remove those parts to make repairs and it's difficult to remove them
Electronics Forum | Mon Sep 11 07:36:04 EDT 2023 | tommy_magyar
See attached snippet from a datasheet: Syringe 1. Twist and remove the cap from the syringe. Do not discard cap. 2. Measure 1 part by volume of A. 3. Measure 1 part by volume of B. 4. Dispense material on a mixing surface or container, and thoroughl
Electronics Forum | Mon May 29 02:15:06 EDT 2000 | Dreamsniper
Hi Buddy, We've tried shifting to this process before and from our point of view here are some of the advantage and disadvantages that we discovered. Advantage 1) Cheap Equipment cost as you just need to use your Solder Paste Printer rather than buy
Electronics Forum | Mon Apr 23 10:11:11 EDT 2007 | grayman
Glue application is widely used in my country.However, some companies want to save cost and remove the glue application. We are also using fixture to cover some components. It has no problem. Please try cleaning your fixture by alcohol or water.Brush
Electronics Forum | Tue Jul 23 18:54:16 EDT 2002 | carln
Is anybody "successfully" cleaning adhesives from the DEK Pump Print stencils? Yes, Dave, I have searched the archives only to find comments ranging from easy to very difficult to clean. However, nobody states what process they are using. What ch
Electronics Forum | Mon Sep 21 18:37:10 EDT 2009 | sbayeta
Hi, Our SMT line has placement capacity of 80K cph, but only 21K cph gluing capacity. The rate between reflow and glue of our products is around 5 to 1. The line works great for the reflow boards, but when we produce glue boards the glue dispenser
Electronics Forum | Thu Dec 07 14:17:03 EST 2006 | russ
I would bet that it is a SMT adhesive used to ensure that the BGA does not move during a secoindary reflow prcess. this glue is easily removed with a soldering iron. Russ