Electronics Forum | Tue Jul 23 18:54:16 EDT 2002 | carln
Is anybody "successfully" cleaning adhesives from the DEK Pump Print stencils? Yes, Dave, I have searched the archives only to find comments ranging from easy to very difficult to clean. However, nobody states what process they are using. What ch
Electronics Forum | Sun Sep 03 09:50:11 EDT 2006 | davef
Se�or Tech: You mean you never stayed at a friends house and woke-up the next morning to find that they shaved your eyebrows or superglued your lips? Now, that's funny. [Well, at the time it's not always funny, but the pix are later.] Don't let th
Electronics Forum | Thu Mar 01 14:13:23 EST 2007 | Brandon
We have a bunch of used solder paste we need removed from our facility. Who provides this type of service for a fair reasonable fee? We are in Austin, Texas and use loctite solder paste. Our supplier is Hisco, but they only provide this service for A
Electronics Forum | Sun Oct 05 15:54:51 EDT 2008 | hasu
Hi All! I remember reading and seeing some (maybe Loctite) product which could be used to fill stencil apertures, but now when I need one, I cannot find it. Or anything like. Can some one please guide me? And with filling I mean permanent filling, n
Electronics Forum | Wed Aug 16 17:42:02 EDT 2000 | John Thorup
Hi Steve You really didn't tell us what is going wrong. Not enough heat to melt this hi temp solder (290C/554F)? Too much heat and burning up the pad/board? Thermo falling off? (remove all the original solder) You won't find Loctite 384 all that remo
Electronics Forum | Thu Oct 26 11:41:53 EDT 2023 | proceng1
We currently use Loctite 348 chipbonder to secure large parts that will hang under the board when reflowing the second side. Rework has been complaining that they sometimes have to remove those parts to make repairs and it's difficult to remove them
Electronics Forum | Tue May 25 12:19:55 EDT 1999 | M Cox
| | | | | | | | | Any suggestions on how to maintain Adhesive dispensing nozzles??? They seem to plug up over night and it is starting to get on my nerves. We have tried leaving the nozzles in the machine, removing them and soaking in alcohol, bl
Electronics Forum | Wed May 26 10:00:03 EDT 1999 | David Scott
| | | | | | | | | | | | Any suggestions on how to maintain Adhesive dispensing nozzles??? They seem to plug up over night and it is starting to get on my nerves. We have tried leaving the nozzles in the machine, removing them and soaking in alcoh
Electronics Forum | Tue Jul 10 13:45:23 EDT 2001 | markhoch
We're stencil printing a Loctite 3614 Chipbonder adhesive, and we're using BioAct SC-10 presaturated wipes to clean the stencil after printing, without much luck. Operators are not able to remove all adhesive material left in the aperatures, and aft
Electronics Forum | Thu Jul 12 10:18:11 EDT 2001 | Hussman
Ummm...why not use Loctite 7360 Surface Mount Adhesive Cleaner? It's designed to remove adhesive and works great. Low oder and can be bought in 500ml cans for hand cleaning. Part# 25658. Use it why any dry wipe. Do not use alcohol to clean this
