Industry News | 2021-02-15 09:25:46.0
Atlanta, GA – Koh Young, the industry leader in True3D™ measurement-based inspection solutions, will participate in a free panel discussion on Tuesday, 23 February 2021 at 10:30AM EST. Register today and secure your seat in the virtual event to learn from Koh Young and others how to optimize the box build assembly process.
Technical Library | 2021-10-20 18:21:06.0
The solderability of the SAC305 alloy in contact with printed circuit boards (PCB) having different surface finishes was examined using the wetting balance method. The study was performed at a temperature of 260 _C on three types of PCBs covered with (1) hot air solder leveling (HASL LF), (2) electroless nickel immersion gold (ENIG), and (3) organic surface protectant (OSP), organic finish, all on Cu substrates and two types of fluxes (EF2202 and RF800). The results showed that the PCB substrate surface finish has a strong effect on the value of both the wetting time t0 and the contact angle h. The shortest wetting time was noted for the OSP finish (t0 = 0.6 s with EF2202 flux and t0 = 0.98 s with RF800 flux), while the ENIG finish showed the longest wetting time (t0 = 1.36 s with EF2202 flux and t0 = 1.55 s with RF800 flux). The h values calculated from the wetting balance tests were as follows: the lowest h of 45_ was formed on HASL LF (EF2202 flux), the highest h of 63_ was noted on the OSP finish, while on the ENIG finish, it was 58_ (EF2202 flux). After the solderability tests, the interface characterization of cross-sectional samples was performed by means of scanning electron microscopy coupled with energy dispersive spectroscopy.
Technical Library | 2013-12-05 17:09:03.0
The functionality of electronic devices continues to increase at an extraordinary rate. Simultaneously consumers are expecting even more and in ever smaller packages. One enabler for shrinking electronics has been the flexible circuit board that allows the circuit board to fit a wide variety of shapes. Flexible printed circuits (FPC) have the capability to be very thin and can have unpackaged components directly attached using surface mount technology (SMT) and flip chip on flex technologies. Bare die can also be thinned and attached very close to the circuit board. However one caveat of high density flexible circuit boards with thin die is that they can be very fragile. The use of back side films and underfill can protect the die making circuits more robust. For underfill to work well it requires good adhesion to the circuit board which can mean that flux residues under the die normally must be removed prior to underfilling.
Technical Library | 2024-01-16 22:29:59.0
Miniaturization continues to be a driving force in both integrated circuit packaging and printed circuit board laminate technology. In addition to decreasing component pitch (lead to lead spacing), utilization of the vertical space by stacking packages has found wide acceptance by both designers and manufactures of electronics alike. Lead free Package on Package (PoP) technology represents one of the latest advancements in vertical electronics packaging integration and has become the preferred technology for mobile hand held electronics applications. TT Electronics in Perry, Ohio has developed the capability to assemble and rework numerous "state of the art" packaging technologies. This paper will focus on the essential engineering development activities performed to demonstrate TT Electronics' ability to both assemble and rework PoP components.
Technical Library | 2013-08-01 13:17:44.0
Electronic industry uses a number of metallic materials in various forms. Also new materials and technology are introduced all the time for increased performance. In recent years, corrosion of electronic systems has been a significant issue. Multiplicity of materials used is one reason limiting the corrosion reliability. However, the reduced spacing between components on a printed circuit board (PCB) due to miniaturization of device is another factor that has made easy for interaction of components in corrosive environments. Presently the knowledge on corrosion issues of electronics is very limited. This paper reviews briefly the materials used in electronic systems, factors influencing corrosion, types of corrosion observed in electronics, and testing methods.
Technical Library | 2016-05-12 16:29:40.0
Advances in miniaturized electronic devices have led to the evolution of microvias in high density interconnect (HDI) circuit boards from single-level to stacked structures that intersect multiple HDI layers. Stacked microvias are usually filled with electroplated copper. Challenges for fabricating reliable microvias include creating strong interface between the base of the microvia and the target pad, and generating no voids in the electrodeposited copper structures. Interface delamination is the most common microvia failure due to inferior quality of electroless copper, while microvia fatigue life can be reduced by over 90% as a result of large voids, according to the authors’ finite element analysis and fatigue life prediction. This paper addresses the influence of voids on reliability of microvias, as well as the interface delamination issue.
Industry News | 2008-02-15 15:45:43.0
OSAKA, JAPAN � February 13, 2008 � Nihon Superior USA, a subsidiary of Nihon Superior Co. Ltd., a supplier of advanced soldering and brazing materials to the global market, announces that it showcased its SN100C products with FCT Assembly, one of its US SN100C Global Partners, at the IPC International Conference on Flexible Circuits, that took place February 13, 2008 in Phoenix, Ariz.
Industry News | 2010-11-30 13:30:04.0
Ironwood Electronics' new package converter - PC-BGA256B/BGA256E-B-01 allow previous product version to be used in the new system boards for test/validation until the new BGA device is released from the foundry or vice versa. These package converters can be soldered directly onto the SMT pads of development boards using standard solder methods.
Industry News | 2013-03-21 12:56:10.0
Andrew Murrietta CEO and co- owner of Murrietta Circuits announced that his company had provided some high-density rigid-flex circuit boards for an experimental medical device that can be implanted in the human brain and be used to control a prosthetic arm, purely by the thoughts of the patient.
Industry News | 2017-10-05 19:30:49.0
Nordson MARCH will present the paper, Enhancing the Performance of Printed Circuit Board Assemblies Using Plasma Treatment, at SMTA Guadalajara 2017. David Foote, Global Applications Manager, Nordson MARCH, will discuss the fundamentals of plasma treatment. Specific applications and examples will be shown to demonstrate the many uses and benefits of plasma processing for printed circuit board assemblies (PCBAs), including managing electrostatic discharge (ESD) damage.
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112
