Industry Directory | Manufacturer
AIM is a leading global manufacturer of solder assembly materials for the electronics industry.
Industry Directory | Manufacturer
Global soldering materials manufacturer founded in 1980 headquartered in IL. U.S.A. Products include: RoHS lead free solders + leaded, Metals Recycling Program, Solder Check Up Program, Technical Support. ISO 9001:2015 Certified
New Equipment | Solder Materials
SAC305 is a lead-free alloy that contains 96.5 % tin, 3% silver, and 0.5% copper. This alloy falls under the JEIDA recommendation for lead-free soldering. When used in wave soldering, AIM’s SAC305 bar solder offers far superior fluidity as compared t
New Equipment | Solder Materials
Whether you are a hobbyist, sheet metal fabricator, or an electronics assembler, StellarTechincal.com provides quality solder for you, including lead-free solder wire. When you shop online at our business, you’ll be able to get a solder bar, babbit f
Electronics Forum | Fri May 05 08:23:07 EDT 2006 | molosse21
Hi everyone We plan to use on our smt line sac 305 and on our wave soldering sn100c. Will there be a compatibility problem if we do make touch up with sn100c on smt or touch up thru hole components with sac 305 ??? Thanks for taking time to reply
Electronics Forum | Sat Sep 12 10:12:20 EDT 2009 | tylaburg
My customer wants an SnPb 63/37 BGA soldered using SAC305 solder paste. What data is avaiable showing the long term reliability of the intermetallics of the solder joints?
Used SMT Equipment | Soldering - Selective
• Less then 100 hours • Stand-alone Machine • 2 Spray Nozzles/Programable • Dual Solder pots / Dual Heads – Loaded with SAC305 • Heads can run 4 different assembles • Pot level detection / Upgraded self-feeder • Automatic solder refill / Autom
Used SMT Equipment | Soldering - Wave
Please enquire to get full documentation and set of pictures
Industry News | 2018-10-18 08:36:26.0
How the modern solder reflow oven works?
Industry News | 2018-03-29 20:48:41.0
SMTA Europe announces Keynote Speaker Ralph Tuttle of Cree, Inc. on High Power LED Solder Joint Reliability at the “Electronics in Harsh Environments Conference” to be held in Amsterdam, Netherlands, on April 25th, 2018.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2023-09-07 14:38:31.0
A repeat customer specializing in high-technology interconnect, sensor, and antenna solutions, partnered with us to dispense small volumes of solder paste (Indium 10.1 SAC305 T6SG 78%m) onto backplane connectors – gold pads 0.175mm x 0.225mm. We performed a test requiring 0.200mm diameter or smaller dots to demonstrate the dispensing capability required.
ALPHA® Preforms with solder paste adds solder volume.
ALPHA® Telecore XL-825 lead-free cored solder wire minimizes spattering in hand soldering operations, thus reducing circuit board contamination and enhancing worker safety and comfort.
Career Center | Rochester, New York USA | Engineering
I have done my undergraduate studies in Mechanical Engineering. I am pursuing my Master's Program in Electronics Packaging. I am currently working as a Research Assistant for RIT-CEMA (Center for Electronics Manufacturing and Assembly). My research
Career Center | Lakewood, California USA | Engineering,Maintenance,Management,Production
Quality conscience, detail oriented, manufacturing engineer, with a hands on approach to overall process improvement and development. Motivated with excellent communication skills and a dedicated team player. Qualifications include: � Safety /Diver
Effect of Soldering Parameters on Reaction Kinetics and Phase Transformations of SAC 305 Solder Effect of Soldering Parameters on Reaction Kinetics and Phase Transformations of SAC 305 Solder As technology becomes increasingly reliant
SMTnet Express, Septemeber 1, 2016, Subscribers: 26,288, Companies: 14,937, Users: 41,025 Reliability Study of Low Silver Alloy Solder Pastes Jennifer Nguyen, David Geiger and Murad Kurwa; Flex (Flextronics International) Sn3.0Ag0.5Cu (SAC305
| https://pcbasupplies.com/lead-free-solder-paste/
Lead-Free Solder Paste -SAC305 Jet Dispensable Solder Paste - PCBASupplies Login Create Account Contact View My Cart Menu × Categories Hand Soldering
GPD Global | https://www.gpd-global.com/lead-free-solder-paste-dispensing.php
Lead Free Solder Paste Dispensing, Leaded Solder Paste Dispensing Home Products Fluid Dispensing Equipment High Precision Dispenser - MAX Series Large Format Board Dispensing - DS Series Table Top Dispensing Equipment Loader
