Industry News | 2016-11-30 18:48:01.0
IPC announced today the October 2016 findings from its monthly North American Printed Circuit Board (PCB) Statistical Program. The PCB book-to-bill ratio continued to strengthen, climbing to 1.08, while sales and orders were both down in October.
Industry News | 2022-10-12 08:07:17.0
I.C.T Provide SMT Production Line solutions with Automated Optical Inspection (AOI) AOI is short for Automated Optical Inspection, which is widely used in the electronics industry to check the appearance of PCBA assembly at the back end of the circuit board assembly line. The basic principle of AOI is to judge whether the object to be tested meets the standard by comparing whether there is a large difference between the object to be tested and the standard image by using image technology. AOI emits a 4-color light source to the PCBA board, which is automatically scanned by an industrial camera for catastrophic failures, such as missing components or quality defects. Therefore, the quality of AOI depends on the image imaging ability, algorithm parsing ability and image discrimination technology. I.C.T AOI has done well in these aspects.
Industry News | 2023-10-08 08:15:43.0
Explore how I.C.T Technical Support is revolutionizing the electronic manufacturing industry in the Philippines by optimizing PCBA Router Machines for electronic consumer product manufacturers. Discover the key solutions driving efficiency and innovation in this dynamic sector.
Industry News | 2020-01-23 17:30:46.0
ASYMTEK brings its latest fluid dispensing and conformal coating solutions to IPC APEX EXPO, San Diego, CA, in booth 1611. New at IPC APEX is the ASYMTEK Vortik™ family of progressive cavity pumps (PCP), with the smallest depositions possible on the market today. The VPs, VPm, and VPg pumps rely on positive displacement to provide continuous needle dispensing of one- and two-component fluids with high-volumetric accuracy, increased reliability, and reduced cycle time. At 0.2 microliters per second, the Vortik VPs offers the lowest flowrate and smallest depositions possible across all PCP pumps available in the market today - delivering precise control of narrow lines and small shots for two-component mixed fluids.
Technical Library | 2019-10-29 02:55:33.0
For every 10 ℃ increase in temperature, the reaction rate is twice to three times. This means that for every 10 ℃ increase in temperature, the life span of the product will be halved, and when the temperature rises by 20 ℃, the life span of the product will be reduced to 1/4. High temperature will lead to aging, oxidation, evaporation, physical deformation and so on. Low temperature will lead to embrittlement, ice formation, viscosity and solidification degree, loss of mechanical strength, physical shrinkage and so on. When the product is shipped, stored and operated in the environment, it will be endangered. In addition, each product has regulatory and certification requirements, and it is important to evaluate reliability and durability before it is put on the market. In general, according to the IEC60068 test standard, it requires the volume of the laboratory to be at least five times the total volume of the sample under test. Haida constant temperature and humidity box can help you meet this demand. So with the fast developmement of manufacturing industry,test becomes a necessity to see wether the product is able to meet regulated standards in R&D satge,Climatest Symor specializes in handling temperature and humidity,we supply environmental test chamber to China State-owned Research Institutes and laboratories,and obtain excellent reputation from international cllients,our company put much efforts on chamber R&D ,striving to supply best-quality climate simulation equipment and after-sale service. For details,pls visit our official website www.climatechambers.com
Industry News | 2021-11-02 21:27:05.0
The wiring and installation of rotary encoders should be conducted in strict accordance with the instructions of each product. While for general encoder installation guidelines, you should pay attention to the following aspects during your encoder mounting work.
Industry News | 2012-04-03 19:45:36.0
Viscom proudly announces that it will exhibit vVision, its recently introduced AOI software in Booth 1H36 at the upcoming NEPCON Show, scheduled to take place April 25-27, 2012, at the World Expo Convention & Exhibition Center in Shanghai.
Industry News | 2016-08-29 17:44:32.0
ASC International today announced that it will exhibit in Booth #140 at SMTA International, scheduled to take place September 27-28, 2016 at the Donald Stephens Convention Center in Rosemont, IL.
Industry News | 2013-06-25 15:50:06.0
ASC International, will exhibit at the SMTA Upper Midwest Expo & Tech Forum, scheduled to take place Thursday, June 27, 2013 at the Embassy Suites Bloomington in Bloomington, MN.
Industry News | 2016-02-18 08:29:26.0
ViTrox Technologies today announced that it will exhibit in Booth #1023 at the 2016 IPC APEX EXPO, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center. ViTrox's new products – V310 3D SPI and V-One will be highlights of the day!
