Electronics Forum | Tue Aug 21 08:34:03 EDT 2007 | rgduval
We have the same problems with cut/tape parts. But, we specialize in short-run prototypes, so I don't have much of a choice but to deal with it, and find a way to make it as easy as possible. We just demo'd a splice tool from Sierra Electronics (ww
Electronics Forum | Fri Jul 31 12:53:58 EDT 2009 | dyoungquist
On our Mydata machine, we place a piece of scrap bare pcb next to the pcb we are loading. Using double sided tape, we attach the cut tape strip to the bare pcb, then program the machine to pick up the parts from that location. The smallest Mydata m
Electronics Forum | Fri Jul 31 09:48:15 EDT 2009 | dyoungquist
You can use cut tape on Mydata machines fairly easily. We are a high mix, low volume manufacturer who has to use cut tape often as that is what our EMS customers provide. It is does take more time to load/unload than a reel does so you need to fi
Electronics Forum | Wed Jul 17 10:44:19 EDT 2013 | gregcr
Hi All, Has anyone seen or used equipment that is capable of automating the process of attaching hookup wire directly to a large SMT pad? Soldering, ultrasonic? I'm looking to see if there is a machine that is capable of automatically taking a tef
Electronics Forum | Thu Jun 11 09:34:11 EDT 1998 | Mike Moninger
I'm surprised there hasn't been a response to this. This technique has been around for some time, as it was used early on for memory boards and the like. The pins come on a reel with a carrier strip or strips. Machines are available from the manufact
Electronics Forum | Mon Oct 03 05:10:19 EDT 2016 | robl
Hi Nikhilesh, It was a long time ago, but we used to buy the nickel in reels then had a cut and feed station on the smt machine with selectable sizes. We did many types of boards in very large volumes, and usually the Nickel strip was soldered to t
Electronics Forum | Wed Apr 10 08:39:11 EDT 2002 | Alan W.
Here are some of the problems (and my pet peeves) that can be found during a machine set-up. I have run into each of these many times over the years. Wrong part value: This can usually be traced to a purchasing, incoming inspection, or kitting mist
Electronics Forum | Thu Sep 13 17:29:02 EDT 2007 | fnorradd
I am currently having a problem with uncut legs on one side of axial components from a universal dual head insertion machine. Initially it was thought that the anvil on one side was engaging slow so I stripped down and changed the seals in the botto
Electronics Forum | Mon Feb 25 15:06:43 EST 2008 | dyoungquist
MyData machines are probably your best choice for low volume/high mix applications. Change over times can be minimal when you are loading your extra magazines/feeders for the next job while the previous job is running on the machine. Component plac
Electronics Forum | Fri May 17 09:41:39 EDT 2002 | pteerink
Save your money. I tried to buy one for a G3 before, had one actually shipped in, and had to return it because it didn't fit the machine. Some other options: 1) buy a tape and reel machine cost you about $10K, but then you have control over
Buy and selling used smt，semi， Robot ,CNC and all used machines
Equipment Dealer / Broker / Auctions
DONGGUAN HUMEN
Dongguan, 30 China
Phone: 13560819457
