Electronics Forum | Mon Mar 07 06:51:31 EST 2011 | mosborne1
Tim you can do your image repeat after you place the whole panel with nozzle #1. In your sequence step program place all with nozzle 1. You can then change to nozzle#2 then place the whole panel with nozzle number 2. This will be one nozzle change. I
Electronics Forum | Mon Mar 11 04:57:31 EDT 2013 | bobpan
You really should edit your programs in central controller where it is much easier to follow the commands shown and to follow the extent data to see whats attached to each part/pickup. The hht can quickly cause issues when the wrong button is presse
Electronics Forum | Wed Sep 12 06:13:22 EDT 2012 | bobpan
Glad i could help.....now this is a little harder....been a long time since i have done comp. fids and i dont have a machine to test....but check these things... 1. In the teach menu.....there is teach component fiducials. Make sure you do this with
Electronics Forum | Thu May 22 17:17:37 EDT 2003 | ssnow
I have to agree with you on the documentation side of the manuals ,they were written before they ever hired a tech writer, when they finally did they wrote manuals for the newer stuff and let the older machines alone. The basic's are pretty straight
Electronics Forum | Mon Apr 08 07:20:56 EDT 2013 | leemeyer
What operating system are you using ? I have found that you need to stay with a DOS based operating system. I am running DOS 6.2 with windows 3.11. I tried win 98 and although it seemed to run properly, I would have problems in the final program. XP
Electronics Forum | Wed Nov 16 14:44:31 EST 2011 | olddog
Bobpan, thank you for your speedy response. As to the items you noted: 1. I did a test of Funct 30 for the first 5 nozzles, 2 times each as follows: noz1 Ht=215 & 219, center=1005 (all nozzles all tests), run out 2.2 & 2.7. Noz2 Ht=228 &228, runout=
Electronics Forum | Tue Sep 11 17:01:38 EDT 2012 | derekj
I've been busy with a bunch of different projects lately, so I hadn't had a chance to tackle this further until recently. I ended up running through all your suggestions another time and low behold, it seems to have solved the issue. I'm currently no
Electronics Forum | Mon Apr 08 13:09:48 EDT 2013 | microaide
I have set Maximum Sequence Steps Per Program Segment to 450 and Maximum Placements Per Program Segment to 200. I have two Quad IVc machines, with a separate central controller in each one. One machine has a waffle feeder and will have vibratory feed
Electronics Forum | Fri Feb 01 19:12:18 EST 2013 | marcelorotofrance
Hi, I have a QUAD 4C mk2. I taught pickups and places from HHT. If I test them individually (RUN STEP PICK/PLACE etc...) before building the sequence, everything runs ok. After the sequence was built, everything goes wrong. Every PICK or PLACE ends i
Electronics Forum | Wed Aug 25 19:35:48 EDT 2004 | russ
This is highly dependent upon your board, vision inspection, part rotation, part type, layout, number of P/Ns per (1 pers or 100 pers) feeder layout, optimization, nozzle changes, etc... all have significant impact on placement speed. I find if you
