Electronics Forum | Tue Oct 11 08:54:18 EDT 2005 | jdengler
-Are you running a program that worked before or is it a new program? -Is there any reason to suspect that the proper has been edited between working and error condition? Jerry
Electronics Forum | Thu Mar 02 23:09:20 EST 2006 | kmp
If you have a servo or encoder problem you should be getting alot of errors. Are all feet leveled on a stable floor? It wouldn't take much to shake them. A full coke machine weighs more.
Electronics Forum | Mon Mar 09 15:40:32 EDT 2009 | smellew
Rodrigo, Is your machine IP2 or IP2E? if you still have the problem contact me direct, and i will take you through the Schematics. Llew Llew@SurfaceMountEngineering.com
Electronics Forum | Mon Mar 09 17:05:05 EDT 2009 | rodrigo
It is an FIP-II 4000. I rather do it through here so other people can benefit. Thanks
Electronics Forum | Fri Apr 24 16:57:23 EDT 2009 | rodrigo
We replaced SA-6 with a new one and the IP2 is up and running. I don't know if you're still looking at this thread but I wanted to thank you and post the result so other people benefit. Thanks so much for the help. Rodrigo
Electronics Forum | Sun Oct 18 11:48:50 EDT 2009 | Rul
Problems found are the machine frequent freeze suddenly and produce error message when homing the machine: servo devices failed ... Action taken. Change the pc with another working machine. result= same problem happen. check the fuse at circuit of t
Electronics Forum | Mon Mar 25 14:59:55 EDT 2013 | jimmyboz
Yes, he is correct, it is probably a sensor. That does NOT mean a sensor is bad, just that it has not been activated during a time limit or servo count. Watch what the last 2 or 3 things it does before the error.
Electronics Forum | Thu May 05 13:25:04 EDT 2016 | donpito
check the cards in the VME and also the exchange and nothing happened . check the configuration of the servo beam 1 x1 and x2 Bean 2 and are working well , switch harnesses x1 and x2 and now fails BEAM 1 x1
Electronics Forum | Fri Jan 05 12:02:28 EST 2018 | ilavu
Camera works fine from home to ref. position to fiducial1 and 2. Problem shows up from home to board stop. AC voltage between AC1 and AC2 is 41.7 and during move it drops to 41.5.
Electronics Forum | Wed Mar 07 19:07:36 EST 2018 | magergar
I have changed the FRQ Amplifier with the FQ amp that has the same parameters and the error persist, the Zero Setting Sensor and the Clutch Origin sensor are working too. Any other posibility?
