Electronics Forum | Tue Sep 08 15:12:56 EDT 2020 | cyber_wolf
I concur with Spoilt on all accounts. If the tombstones are isolated to the same P/N this is an indicator that your process is probably not to blame. At this point you have to try and mitigate the issue. Things to try [if possible] : 1. Try a soa
Electronics Forum | Tue Jun 12 15:39:45 EDT 2007 | patrickbruneel
Chunks, So in layman�s terms you are saying shut the darn thing off, if you�re not using it? And by the way your explanation brings up some memories; I once had a boss that spoke to me the same way. The results are still visible, I shake my head to
Electronics Forum | Tue Jun 04 09:46:54 EDT 2013 | markhoch
While both of those products do make it easier to profile the wave, a standard reflow oven profiler, with some long thermocouples, are all you really need. You can even use the standard Thermocouples and send the profiler through the oven on a traili
Electronics Forum | Wed Jul 20 14:56:29 EDT 2005 | CLampron
The mount plane is not the same every time. Our machines are conveyorized and the bottom rail is fixed so the mount plane does change with the board thickness. The stand alone table has a V notch for holding the board with the flat edge on the bottom
Electronics Forum | Wed Oct 21 09:43:40 EDT 1998 | Stefan Witte
You'll not find any solvent, which removes cured epoxy and not attack the board material as well. If there are traces underneath the surface mount components even mechanical removal of the epoxy may mess up your boards. As a mechanical tool I recomme
Electronics Forum | Tue Nov 08 10:52:29 EST 2016 | aemery
Tom, Hardware limit means the machine thinks it is at the limit sensor or a particular axis timed out before it got to the home sensor during the reset sequence. Go to your O/I map and see if any of the axis limit sensors are lit. You could have a
Electronics Forum | Fri Sep 26 12:16:52 EDT 2008 | bickt
you cannot swap 0-3 only 0-1 or 2-3 they are not the same euro cards. they function very diffrently. if you look you will see there are more chips and circuitry on one set. there are 2 w/red leds and 2 with green leds. at least thats how they soo
Electronics Forum | Fri Aug 28 12:46:04 EDT 2020 | inspiredmorris20
Greetings all, my cp45 pnp machine is down this morning, gives me the code 0002 (front EME switch pressed). operator said they did not E-Stop, reset the unit and reboot the S/W a few times. the code pops up as soon as the software loads. I can turn
Electronics Forum | Fri Jul 10 07:52:15 EDT 1998 | smd
Most of you guys probably wish TH would just go away. Maybe for some of you it has. We have some older but very successful WAN controller boards using TH parts so we get to use automated equipment for this. We have an Amistar CI-3000 inserter that so
Electronics Forum | Wed Jan 19 10:44:23 EST 2005 | russ
Although I have not personally run or programmed either the Universal or the Fuji to any great extent, I have worked in factories that have utilized each type. One had 4796 machines and the other used Fuji CP3, 4, 4-2, 6, 643. As an observer I am d