Electronics Forum | Thu Jul 28 03:49:06 EDT 2005 | aj
Are you seeing many of the components in the reject bin of the machine? If it is feeder related I would expect to see some rejects unless the part is jumping and landing in the same orientation i.e. 3 leads on same side everytime! Other than that I
Electronics Forum | Thu Apr 11 11:06:27 EDT 2013 | ericrr
1) I think maybe not, however having said that, our conveyor does not work between the final placement machine and the oven, in the early days before I became a "experienced" operator in pulling the board out of machine running it along the track to
Electronics Forum | Tue Jul 19 03:06:42 EDT 2016 | ishwarsingh1
Upside down placement of a crystal oscillator is acceptable or not ?? As per IPC 8.3.2.9.2 Rectangular or Square End Chip Components – 1, 3 or 5 Side Terminations.I am not sure whether is applicable for crystal oscillator or not . Your answer wo
Electronics Forum | Tue Jul 19 11:10:04 EDT 2016 | ishwarsingh1
Thanks mike .. it would really helpful for me
Electronics Forum | Tue Jul 19 10:28:21 EDT 2016 | mrk
What kind of oscillator are you placing (Manufacturer part #)? I do not believe that oscillators fall under the "chip component" category. Even if they did, most all SMT oscillators that I have come into contact with have 1 sided terminations on the
Electronics Forum | Wed Jan 26 07:48:37 EST 2000 | Dave F
Maddog: Most placement machines require shutting-down the placement process to exchange a feeder. Dave F
Electronics Forum | Thu Feb 13 12:57:43 EST 2003 | Claude_Couture
So, to really get reliable pickup rates from new bulk feeders, I just need to replace all the chip shooters we have with more recent ones with pickup correction capability. So where is the saving? ;-) -Upside down resistors? not an issue. so what if
Electronics Forum | Wed Sep 26 09:56:50 EDT 2001 | John S
This will probably sound like a dumb question, but... I have a specific 1206 chip resistor that routinely ends up placed upside down on the pcb. We use Juki 750 placement machines. I normally run the machine with the auto-correct for the pick posi
Electronics Forum | Fri Mar 24 10:26:45 EST 2000 | Russ
Sal, Interesting problem, I have found that W.S. pastes tend to have a shorter tack time in real life than what is advertised. Usually the manufacturers specify tack time as after placement let the board sit and then turn it upside down and see if
Electronics Forum | Tue Jun 10 20:31:55 EDT 2003 | iman
In a perfect world, the machines would be maint."guys" for the automation machines. Think "closed loop" system. Anyway, getting back to our reality job, we are still game for automation to improve thru'put, quality, reduce problems. The focus here