Electronics Forum | Sun Sep 27 10:42:35 EDT 1998 | l atch
I'm looking for a chart that will help me identify smt resistors and capacitors. I have figured out a few on my own. a resistor with the numbers 510 printed on it was a 51 ohm resistor. numbers 221 was a 220 ohm resistor. numbers 102 was a 1k resis
Electronics Forum | Tue Oct 30 15:04:36 EDT 2018 | SMTA-Shafiq
Steve, Part numbers with the same specification are not part of the same BOM. Scenario is, SMT Line #1 builds Products X, Y and Z Product X has a part number #1 that is a resistor with 50 ohm value and a power rating Product Y has a part number #
Electronics Forum | Mon May 08 16:56:00 EDT 2000 | Peter van den Berg
Thanks Dave, we already use zero ohm resistors. What we're looking for is a flexible (bendable) jumper.
Electronics Forum | Fri Feb 24 09:08:47 EST 2012 | esoderberg
Look at http://www.Zierick.com. P/N's 1179T or 6233-AAAA-140. These are SMT jumpers that we use in our products.
Electronics Forum | Thu Oct 16 15:24:33 EDT 2003 | daanterstegge
An explanation that could possibly help (depending on the exact code on these parts) is on http://www.marsport.demon.co.uk/smd/res.htm. The author of this ends the page with a "Personally, I'd check with an ohm-meter!". Daan Terstegge http://www.smt
Electronics Forum | Mon Sep 28 09:18:30 EDT 1998 | Ben Wilmot
The majority of SMT resistors use the following notation. 10 X eg 153 represents 1k5 resistor The third digit in the sequence denotes the number of zeros to add after the first two digits giving the value in ohms. Many Caps will follow the same nota
Electronics Forum | Tue Nov 25 16:26:43 EST 2003 | tdurston
We are trying to establish requirements and process controls for completed, cleaned SMT assemblies. We have problems with our high impedance circuits (100 meg ohms) being affected by residue. Some boards require additional cleaning cycles to remove
Electronics Forum | Wed Jan 09 20:40:58 EST 2002 | ianchan
Since we are on the topic, What we do over here, is to get SMT Technical to machine pick&place "sample component layouts" onto double-sided tape, which in turn is placed onto an actual PCB... QA will take that double-sided tape sample, and using an
Electronics Forum | Tue Jun 29 14:55:22 EDT 2010 | rgduval
For the capacitors that Yageo analyzed... Were they taken out at representative points in the process?? ie. were samples taken from pre-assembly, pre-ICT, post-conformal coat, post-final test? You note that the parts 'seem' to be ok up to ICT. And
Electronics Forum | Thu Feb 24 21:44:27 EST 2000 | Dave F
Horace: Area you in the rainy or the dry portion of the South? ;-) Now, excuse me from mincing words with you ;-) �, but buying a manufacturing software package is a serious (expensive) endeavor that will leave no part of your company unscathed. I�d
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694