Technical Library | 2019-11-17 22:46:45.0
Overview of walk-in temperature and humidity chamber: It also belongs to environmental test equipment, it tests whether the product can resist high temperature, low temperature, humidity, or the physical and chemical changes produced under extreme conditions, the walk-in temperature and humidity chamber volume is large, the product is placed, or a large object can be placed, such as automobile, new energy, television and liquid crystal screen, etc. How to do the routine maintenance of the walk-in temperature and humidity chamber: 1. The wet gauze basically, if there is no special case, s/b usually changed once in 3 months 2. The water channel shall be regularly cleaned, including water cup, water tank, etc., so as to prevent the water from being blocked,affect the humidity test. 3. It is forbidden to test the flammable and explosive products inside working room. 4. Clean the chamber on a regular basis 2. How to operate walk-in temperature and humidity chamber: The operation method is same as standard temperature humidity test chamber,the controller is 7-inch LCD programmable color screen, you only need to setthe temperature point---test time--how many cycles need to be tested, This can be done automatically, and the machine will stop automatically when it is complete. If there is any problem during the operation, the corresponding problem point will be displayed on the machine control screen. Walk-in temperature and humidity chamber is a must equipment for reliability test of Automobile,Aerospace,Electronic parts,etc,the operation and maintenance are easy,it is teh tear down mahcine,Climatest engineers will be dispatched to do on-site support,for instance,we will finish commissioning,train customers how to operate,maintain,welcome to follow our company facebook page:https://www.facebook.com/Climatechambers
Technical Library | 2019-11-12 02:09:22.0
Thermal shock test chamber can be used for testing the chemical change or physical damage on composite materials caused by the thermal expansion and contraction of the sample in the shortest time,which is subjected to extremely and continuous high and low temperature environment.so how to check the temperature recovery time of this chamber? Normally we take following steps to inspect the temepratuire recovering time: 1.Install the temperature sensor at the specified position, and adjust the temperature controller of hot zone and cold zone to the required nominal temperature respectively. 2.The temperature increases and reduces respectively,30min after temperature in two zones reach stable status,record temperature value of the measuring point,pls set the temperature value of two zones to be required nominal temperature. 3.The temperature shock test chamber automatically places the inspected load into theh ot zone,select the corresponding retention time according to regulated standard. 4.Set the transfer time,then the inspection load is transferred from hot zone to cold zone, and the temperature of the measuring point is observed and recorded, and then the reverse conversion of the load from cold zone to hot zone is carried out according to the same method, and the temperature of the measuring point is observed and recorded. www.climatechambers.com
New Equipment | Solder Materials
Sn63/Pb37 Electropure™ is a high purity alloy that is composed of 63% tin and 37% lead. Electropure is alloyed in a proprietary method that results in a low drossing, high wetting solder. The Electropure process reduces suspended oxides in the solde
Used SMT Equipment | Soldering - Wave
Speedline VectraElite Automated Wave Soldering Machine (2007) Brand: Speedline Model: VectraElite Year: 2007 Serial #: VC2-15869 Type: Automated Wave Soldering Machine Machine Specifications: Voltage: 480V Solder used: SN63Pb37 Sono
Industry News | 2017-01-29 09:37:08.0
TopLine will exhibit its MSC Series of Micro-coil springs, a novel interconnect for CCGA (Ceramic Column Grid Array) IC packages for harsh environments. In tests using daisy chain test vehicles, Micro-coil springs absorbed extreme shock of up to 50,000g before failing. Commercial applications include aerospace, avionics, military, down-hole oilfield drilling and automotive electronics. Test results were initially presented at IEEE CPMT 2012.
Industry News | 2008-02-29 16:42:42.0
ITASCA, IL � January 7, 2008 � Kester will provide lead-free resources, technologies and products in booth 1660 at the upcoming APEX 2008 exhibition and conference, scheduled to take place April 1-3, 2008, in Los Vegas.
-副本.jpg)
Parts & Supplies | Circuit Board Assembly Products
ES19204 Kapton Tape Kapton Tape is a polyimide film-backed silicone adhesive tape with extremely low electrostiatic discharge properties. Antistatic properties is in back adhesive side. It has high dielectric strength. Polyimide masking tape, offers
Industry News | 2018-12-08 03:24:24.0
RoHS Guide in Electronics: RoHS, WEEE and Lead-Free FAQ
Used SMT Equipment | Soldering - Reflow
T3A Conveyor Hot-air Reflow Oven Conveyor Hot-air Reflow Oven has four (4) heating zones and (300mm) wide and (1900mm) long conveyor for low to medium volume production runs. T3A utilizes PID intelligent micro-computer automatic temperature co
Used SMT Equipment | Soldering - Reflow
T300 Conveyor Hot-air Reflow Oven Conveyor Hot-air Reflow Oven has (3) heating zones and (300mm) wide and (1200mm) long conveyor for low to medium volume production runs. T300 utilizes PID intelligent micro-computer automatic temperature cont
